Current IssueSpecial IssueEditorial BoardOnline First ArticlesArchive
Current IssueSpecial IssueEditorial BoardOnline First ArticlesArchive

Full Research Article

Effect of Different Sowing Norms and Row Spacing on Yield and Yield Components of Safflower (Carthamus tinctorius L.) in a High-altitude Environment under Irrigated Conditions

F
Fırat SEFAOGLU1,*
0000-0002-8485-6564
1Department of Genetics and Bioengineering, Faculty of Engineering and Architecture, Kastamonu University, Kastamonu, Türkiye.

  • Submitted22-03-2026|

  • Accepted25-05-2026|

  • First Online 08-06-2026|

  • doi 10.18805/LRF-951

ABSTRACT

Background: This study specifically investigated how different combinations of row spacing and sowing norms affect the yield and agronomic traits of the oilseed crop, safflower (Carthamus tinctorius L.).

Methods: The study was conducted in 2017 and 2018 using the ‘Dinçer’ and ‘Yenice’ safflower genotypes. A factorial experiment was performed involving three different row spacing treatments (20, 40 and 60 cm) and three different sowing norm treatments (20, 40 and 60 kg ha-1. The parameters examined included plant height, number of branches, number of heads, number of seeds per head, 1000-seed weight, seed yield, oil content and oil yield. The effects of the treatments were statistically evaluated across different planting distances.

Result: The row spacing treatment significantly affected all the examined parameters. The 40 cm row spacing was particularly effective, causing a decrease in plant height and branching while significantly increasing 1000-seed weight, seed yield, oil content and oil yield compared to the 20 and 60 cm spacings. Similarly, the sowing norms significantly affected all measured characteristics. The combination of 40 cm row spacing and 60 kg ha-1 sowing norm yielded the best results for seed yield, indicating that frequent sowing practices can significantly boost safflower productivity and optimize oil yield under irrigated, semi-arid conditions.

INTRODUCTION

Safflower is one of the few crops that can be grown economically in arid and semi-arid regions (Reddy et al., 2003). Medicinal and aromatic plants play an important role in protecting health (Bayraktar et al., 2020a; Bozok et al., 2025) and managing diseases with their anti-inflammatory (Bayraktar et al., 2020b; Bayraktar et al., 2021), antimicrobial (Ülker  et al., 2023; Orkun and Bayraktar, 2025c) and anticarcinogenic (Bayraktar and Bayraktar, 2019) effects. These plants also exhibit significant antidiabetic properties (Çelikel  et al., 2024; Orkun and Bayraktar, 2025a; Orkun  and Bayraktar, 2025b), thanks to their phytochemical compounds and high antioxidant contents (Bayraktar et al., 2023; Orkun and Bayraktar, 2025d; Ozcan et al., 2024; Gül  et al., 2024; Ozcan et al., 2026).
       
It is also an oilseed crop of global importance due to its advantages such as non-selectiveness to soil, suitability for agricultural mechanization, low input costs and high oil quality (Delshad et al., 2018). Safflower plays a critical role in preventing vegetable oil deficits, yet it often fails to reach its full yield potential due to traditional production methods. Therefore, optimizing agricultural factors (agronomy) will provide a significant contribution to oil production (Çalıskan and Çalıskan, 2018).
       
Good agronomic practices, together with high-yielding varieties, form the basis for obtaining high yields per unit area; where the optimum plant number and distribution are determined by varietal characteristics (Kayin et al., 2024; Sefaoglu and Ozer, 2022). Since plant density and distribution determine safflower yield and quality, appropriate agricultural practices (Such as planting norm and row spacing) are known to significantly increase the seed and oil yield (Sefaoglu and Özer, 2022). Low seed density delays maturation as individual plants produce more branches and heads, which extends the overall flowering and seed-filling period. Additionally, it reduces weed competition because the sparse canopy fails to provide sufficient ground cover to suppress weed growth. Conversely, excessive seed density, especially in years with low rainfall, increases disease rates by creating a more humid microclimate within the dense canopy and restricting airflow between plants. This increased competition for limited resources and moisture also reduces seed and oil yields (Berglund et al., 1998; Sefaoglu and Özer, 2022). This study focused on optimizing the commercial cultivation of safflower in the semi-arid eastern anatolia region, where this plant species is new. The primary objective was to investigate how row spacing and sowing norm (Plant density) affect the yield and agronomic traits of different safflower varieties under irrigated conditions, ultimately determining the best combination for production in this specific climate.

MATERIALS AND METHODS

Agronomic practices and traits measured
 
The two-year study (2017-2018) was conducted in Erzurum, Eastern Anatolia (1663 m altitude, 41°67'E, 39°97'N), which has a semi-arid climate (meteorological data are presented in Fig 1). Meteorological data indicated that growing season temperatures remained consistent across both years. However, 2018 was characterized by a higher total precipitation of 285.9 mm, whereas 2017 received only 94.0 mm, falling below the long-term average. The experimental soil was characterized as clayey-loamy with a slightly alkaline reaction (pH 7.1-7.4). Chemical analysis revealed that the soil was medium in organic matter, sufficient in potassium, but low in phosphorus, with values ranging from 3.32 to 3.52 kg da-1. The experiment utilized a randomized complete block design with three replications, arranged as a split-split-plot factorial. The factors studied included two safflower cultivars (Dinçer and yenice in main plots), three row spacings (20, 40 and 60 cm in subplots) and three sowing norms (20, 40 and 60 kg ha-1 in sub-subplots). Sowing was done in mid-May of both years. Fertilization involved the application of 40 kg ha-1 triple superphosphate and 60 kg ha-1 ammonium sulfate. Each plot consisted of 4 rows of 5 m length. Harvesting  was done on September 30 in both years, with samples collected from the middle 2 rows to eliminate edge effects and the seeds were subsequently separated by machine threshing.

Fig 1: Some important climatic data of the study area for 2017-2018.



Statistical analysis
 
All the data were analyzed using the SPSS package ((SPSS, Version 20.0, SPSS Inc, Chicago, IL, USA). When the F-test indicated statistical significance at the P=0.05 level, the protected least significant difference (Protected DUNCAN) was used to separate the means (Steel and Torrie, 1980).

RESULTS AND DISCUSSION

Significant annual differences (P<0.01) were observed for all traits, with the 2018 season yielding higher seed and oil yields due to favorable precipitation and temperature conditions. In contrast, the drier and hotter 2017 season negatively affected safflower growth and key yield components, such as plant height and branch number, due to rainfall deficit and heat stress. These environmental variations significantly influenced the performance of both ‘Dinçer’ and ‘Yenice’ cultivars, with 2018 providing better conditions for seed filling and oil accumulation.
 
Plant height
 
Plant height was significantly affected by year, cultivar, row spacing, sowing norm and the cultivar x row interaction (P<0.01) (Table 1). Plant height was substantially greater in 2018 (84.9 cm) than in 2017 (64.2 cm) due to more favorable climatic factors (Montemurro et al., 2007; Fig 1). The Dinçer cultivar was 6.8 cm taller than Yenice. The highest plant height was achieved at the 20 cm row spacing and 60 kg ha-1 sowing norm, while the shortest was at 40 cm spacing and 20 kg ha-1 application. This indicates that increased plant density stimulates vertical growth by intensifying competition for sunlight (Moghaddasi and Omidi, 2015; Uke et al., 2017).

Table 1: Different parameters of safflower cultivars grown at different row spacing and planting rates.


 
Branch number
 
Branch number exhibited significant effects from year, cultivar, row spacing, sowing norm and the cultivar x row and row x norm interactions (P<0.01). The highest average branch number was recorded in 2018 (6.2 pieces), attributable to the high and uniform rainfall distribution during the growing season. The Dinçer variety (5.9 pieces) generally produced more branches (Table 1). Branch number significantly varied inversely with plant density: it increased with wider row spacing (60 cm yielded the highest value) but decreased significantly as the sowing norm was increased (20 kg ha-1 yielded the lowest). This observed reduction in branching in dense plantings is likely due to reduced light penetration and increased competition (Sharif and Omidi, 2016), as the plant prioritizes vertical growth over lateral development.
 
Head number
 
The head number, a critical yield factor, was significantly influenced by year, sowing norm and cultivar x row interaction (P<0.01) and by cultivar (P<0.05). The average head count in 2018 (14.4) was significantly higher than in 2017 (11.0) due to more favorable ecological conditions, specifically beneficial rainfall and temperature (Table 1), (Fig 1). The Dinçer cultivar produced the maximum number of heads. While the effect of different row spacing was statistically insignificant, the head number exhibited a clear inverse relationship with seeding density. The highest number of heads (13.3 pieces) was obtained at the lowest sowing norm (20 kg ha-1) and the lowest (12.4 pieces) was obtained at the highest norm (60 kg ha-1). This density-dependent decrease is consistent with previous reports that increased sowing norm reduces the number of heads due to intensified plant competition (Moghaddasi and Omidi, 2015; Uke et al., 2017).
 
Seed number
 
The number of seeds per head was significantly influenced by year, cultivar, sowing norm and the two-way interactions row spacing x cultivar and row spacing x sowing norm (P<0.01); row spacing alone was also significant (P<0.05). The highest seed count was recorded in 2018 (25.3 seeds) and the Dinçer cultivar produced the maximum number of seeds per head (24.5 pieces) due to genetic differences (Table 1). A wider 60 cm row spacing maximized seed number (Likely by enhancing branching via increased red light reception), while increasing the sowing norm significantly reduced the count (lowest at 60  kg ha-1 with 23.2 seeds), a reduction attributed to high plant density causing a post-flowering water deficit (Sefaoglu and Ozer, 2022; Caliþkan and Caliþkan, 2018).
 
1000 seed weight
 
The Thousand Seed Weight (TSW), a key yield determinant, was significantly affected by year, cultivar, row spacing, sowing norm and all two- and three-way interactions (Table 2). TSW was substantially higher in 2018 (45.3 g) than in 2017 (41.0 g), which is attributed to sufficient rainfall and suitable temperatures during the critical July 2018 flowering period (Beyyavas et al., 2011). TSW showed an inverse relationship with both row spacing (highest at the narrowest 20 cm with 44.4 g) and sowing norm. This negative response to high density is likely due to intensified competition slowing metabolic activities during the seed-filling stage (Zarei et al., 2011; Caliskan and Caliskan, 2018).

Table 2: Different parameters of safflower cultivars grown at different row spacing and planting rates.


 
Seed yield
 
Seed yield, which is the cumulative result of various yield components and external factors, was significantly affected by year, variety, row spacing and sowing norm treatments (Table 2), (P<0.01). The effects of all interactions, except row spacing x sowing norm, were insignificant (Table 2). Seed yield exhibited significant genotypic differences (Bella  et al., 2019), with Dinçer (1360.9 kg ha-1) outperforming Yenice (1190.0 kg ha-1). Contrary to expectations, the first trial year yielded approximately 170.1 kg ha-1 higher than the second. This lower yield in the second year is likely attributed to climatic factors (Vicianova et al., 2020), specifically irregular rainfall and adverse temperatures during critical growth stages (emergence, flowering and grain-filling), negatively impacting key yield components (Sefaoglu and Ozer, 2022). Seed yield decreased as row spacing increased (1420.6 kg ha-1 at 20 cm vs. 1160.7 kg ha-1 at 60 cm), demonstrating that wider spacing leads to increased yield components but a lower overall yield per unit area. Conversely, seed yield increased consistently with the increase in sowing norm, peaking at 1360.2 kg ha-1 with the 60 kg ha-1 norm (Fig 2). This finding aligns with studies reporting that higher sowing norms increase yield (Ahadi et al., 2011), although other research suggests wider spacing enhances light utilization and reduces competition, leading to higher individual plant yield (Berglund et al., 1998; Zarei et al., 2011).

Fig 2: The effect of genotypes ´ sowing date interaction on seed yield of (a) Dinçer and (b) Yenice genotypes.


 
Seed oil concentration
 
Seed oil concentration was significantly affected by all treatments, as well as the cultivar x row spacing and row spacing x sowing norm interactions (P<0.01) (Fig 3), (Table 2). Oil content is highly dependent on genotype (Kose and Bilir, 2017; Kayin et al., 2024) and climatic conditions, notably temperature during the grain filling period (Weiss, 2000). The higher crude oil ratio observed in 2018 (Wetter year) is attributed to significantly higher total rainfall in May, June and July compared to 2017 (Table 2). Among row spacings, the highest oil content was obtained at 40 cm. While the oil ratio showed no significant change between the 20 and 40 kg ha-1 sowing norms, it was unexpectedly higher in the densest planting (60 kg ha-1). This highlights that environmental factors, particularly adequate moisture during critical stages, often override simple agronomic density effects in determining seed oil quality (Fig 3).

Fig 3: The effect of genotypes ´ sowing date interaction on seed oil percentage of (a) Dinçer and (b) Yenice genotypes.


 
Oil yield
 
Oil yield was significantly affected by all factors, reflecting the combined influence of oil concentration and seed yield (Table 2), (Fig 3). Due to its superior genetic structure, the Dinçer cultivar produced the highest oil yield. The lower oil yield in the first year is attributed to irregular and insufficient rainfall. Oil yield showed a density-dependent response, with the lowest yield recorded at the widest 60 cm row spacing and the highest (330.5 kg ha-1) obtained at the narrowest 20 cm spacing. Furthermore, oil yield increased proportionally with the sowing norm, reaching its maximum at 60 kg ha-1. This pattern indicates that seed yield per unit area is the primary factor driving the final oil yield, outweighing the minor changes in oil concentration.
 
Principal component anaysis (PCA)
 
The principal component analysis (PCA) identified two effective components (with eigen values > 1) (Fig 4). These components explained the majority of the total variance in both cultivars: 98.7% in Dinçer (First: 28.3%, Second: 70.4%) and 97.6% in Yenice (First: 22.3%, Second: 75.3%). In the Dinçer cultivar, the treatment combinations of 40 cm row spacing with 20 kg ha-1 and 40 kg ha-1 sowing norms clustered together, showing strong correlations with branch number, head number and plant height. In contrast, 40x60 cm and 20x40 cm distances were associated with the major yield components: 1000-seed weight, seed oil concentration, oil yield and seed yield. For the Yenice cultivar, the 20x20 cm and 20x40 cm distances clustered, correlating strongly with a wider range of traits including plant height, seed number, thousand seed weight and head number. Additionally, the highest sowing norms (60x2 kg ha-1 and 60x4 kg ha-1) correlated strongly with branch number, while the 20x6 kg ha-1 distance showed high correlations with seed oil concentration, oil yield and seed yield (Fig 3; Fig 4).

Fig 4: The results of the dendrogram based on cluster analysis and the biplot of the first and second components from the principal component analysis (PCA) for the two genotypes (a- Yenice, b- Dinçer).

CONCLUSION

The study demonstrates that safflower yield and quality are significantly influenced by row spacing and sowing norms in high-altitude, irrigated environments. While wider row spacing (60 cm) improved individual plant traits such as branch and head number, it resulted in a lower overall seed and oil yield per unit area. The 40 cm row spacing provided the most balanced performance, yielding the highest results for seed yield, oil content and oil yield. Regarding plant density, the 60 kg ha-1 sowing norm was found to be the most effective for maximizing total productivity. Consequently, the study concludes that a combination of 40 cm row spacing and a 60 kg ha-1 sowing norm is the optimal configuration for achieving maximum yield and suitability for mechanized production under these specific climatic conditions.

ACKNOWLEDGEMENT

The author would like to thank Kastamonu University for providing the necessary facilities and infrastructure to conduct this research.
 
Disclaimers
 
The content and its accuracy is the sole responsibility of the authors. It does not reflect institutional views and no liability is accepted for any losses from its use.
Informed consent
 
Since this study involved only commercial cell lines and did not involve any human participants, biological materials, or personal data, clinical trial registration and informed consent were not required.

CONFLICT OF INTEREST

The authors declare that there are no conflicts of interest regarding the publication of this paper. The research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.

REFERENCES


  1. Ahadi, K., Kenarsari, M.J. and Rokhzadi, A. (2011). Effects of sowing date and planting density on growth and yield of safflower cultivars as second crop. Advances in Environmental Biology. 5(9): 2756-2760.

  2. Bayraktar, B. and Bayraktar, S. (2019). Investigation of Circadian Rhythm and Cortisol Circadian Rhythm Physiology in Cancer. Science and Technology Research, INES, Çizgi Publishing, Konya, pp. 161-165.

  3. Bayraktar, B., Tekce, E., Aksakal, V., Gül, M., Takma, Ç., Bayraktar, S. and Eser, G. (2020b). Effect of the addition of essential fatty acid mixture to the drinking water of the heat stress broilers on adipokine (Apelin, BDNF) response, histopathologic findings in liver and intestines and some blood parameters. Italian Journal of Animal Science. 19(1): 656-666. doi: 10.1080/1828051X.2020.1778548.

  4. Bayraktar, B., Tekce, E., Bayraktar, S., Böyük, G., Takma, Ç., Aksakal, V. and Gürbüz, A.B. (2023). Investigation of endocrine response of thyroid and intestinal and adipose tissues due to the addition of Moringa oleifera essential oil in diet for quails exposed to heat stress. Revista Brasileira de Zootecnia. 52: e20210040. doi: 10.37004/rbz.e20210040.

  5. Bayraktar, B., Tekce, E., Kaya, H., Gürbüz, A.B., Dirican, E., Korkmaz, S. and Ülker, U. (2021). Adipokine, gut and thyroid hormone responses to probiotic application in chukar partridges (Alectoris chukar) exposed to heat stress. Acta Veterinaria Hungarica. 69(3): 282-290. doi: 10.1556/ 004.2021.00030.

  6. Bayraktar, B., Tekce, E., Kaya, H., Karaalp, M. and Turunc, E. (2020a). The impact of dietary tarragon (Artemisia dracunculus) on serum apelin, brain-derived neurotrophic factor, cardiac troponin concentrations and histopathology of liver tissue in laying hens housed at different stocking densities. Vet Med-Czech. 65: 269-279. doi: 10.17221/ 9/2020-VETMED.

  7. Bella, L.S., Tuttolomondo, T., Lazzeri, L., Matteo, R., Leto, C. and Licata, M. (2019). An agronomic evaluation of new safflower (Carthamus tinctorius L.) germplasm for seed and oil yields under Mediterranean climate conditions. Agronomy. 9(8): 468. doi: 10.3390/agronomy9080468.

  8. Berglund, D.R., Riveland, N. and Bergman, J. (1998). Safflower Production. North Dakota State University NDSU Extension Service.

  9. Beyyavas, V., Haliloglu, H., Copur, O. and Yilmaz, A. (2011). Determination of seed yield and yield components of some safflower (Carthamus tinctorius L.) cultivars, lines and populations under the semi-arid conditions. African Journal of Biotechnology. 10(4): 527-534. doi: 10.5897/AJB10.2223.

  10. Bozok, Ü.G., Özcan, G.B. and Cinar, F.U. (2025). Reduction of torsion detorsion induced testicular damage with hawthorn extract: Oxidative, hormonal and histological effects. Food Science and Nutrition. 13(5): e70211. doi: 10.1002/ fsn3.70211.

  11. Calıskan, S. and Calıskan, M.E. (2018). Row and plant spacing effects on the yield and yield components of safflower in a mediterranean-type environment. Turkish Journal of Field Crops. 23(2): 85-92. doi: 10.17557/tjfc.427807.

  12. Çelikel, T.S., Bayraktar, B., Bülbül, A.S., Sait, A. and Korkmaz, S. (2024). Effect of different rates of rambutan peel extract on visfatin and cardiac troponin ı response in type 2 diabetic rats ýnduced with streptozotocin. Indian Journal of Animal Research. 58(11): 1969-1974. doi: 10.18805/ IJAR.BF-1899.

  13. Delshad, E., Yousefi, M., Sasannezhad, P., Rakhshandeh, H. and Ayati, Z. (2018). Medical uses of Carthamus tinctorius L. (Safflower): A comprehensive review from traditional medicine to modern medicine. Electronic Physician. 10(4): 6672. doi: 10.19082/6672.

  14. Gül, S.N.S., Eminoğlu, D.Ö., Tekçe, E., Bayraktar, B., Güven, L., Dilsiz, A. and Sait, A. (2024). Eugenol alleviates the negative effects of experimental periodontitis and regulates adipokine hormones in rats. South African Journal of Botany. 172: 579-585. doi: 10.1016/j.sajb. 2024.07.049.

  15. KayIn, G.B., Kayýn, H. and Göksoy, A.T. (2024). Effects of plant density on micronutrient uptake in sunflower (Helianthus annuus L.) varieties. Turkish Journal of Field Crops. 29(1): 9-17. doi: 10.17557/tjfc.1417088.

  16. Kose, A. and Bilir, O. (2017). The influence of row spacing and seeding rate on yield and yield components of safflower (Carthamus tinctorius L.). Journal of Field Crops Central Research Institute. 26(1): 45-52. doi: 10.28994/ tcrad.320491.

  17. Moghaddasi, M.S. and Omidi, A.H. (2015). Determination of optimum row-spacing and plant density in goldasht safflower variety. Scientific Papers, Series A. Agronomy. 58: 301- 306.

  18. Montemurro, F., Giorgio, D.D., Fornaro, F., Scalcione, E. and Vitti, C. (2007). Influence of climatic conditions on yields, N uptake and efficiency in sunflower. Italian Journal of Agrometeorology. 2: 28-34.

  19. Orkun, E.T. and Bayraktar, B. (2025a). Effect of jackfruit pulp extract on serum nesfatin-1 and visfatin levels in streptozotocin-induced rats. Indian Journal of Animal Research. 59(2): 293-298. doi: 10.18805/IJAR.BF-1902.

  20. Orkun, E.T. and Bayraktar, B. (2025b). Effect of Moringa oleifera oil extract on adipokine (Apelin, visfatin and nesfatin-1) and cardiac (cTnI) response in streptozotocin-induced rats. Indian Journal of Animal Research. 59(1): 108- 113. doi: 10.18805/IJAR.BF-1904.

  21. Orkun, E.T. and Bayraktar, B. (2025c). The effect of cannabidiol on myokine, cerebral and cardiac response in rats with sepsis ýnduced by cecal ligation and puncture method. Indian Journal of Animal Research. 59(3): 497-502. doi: 10.18805/IJAR.BF-1905.

  22. Orkun, E.T. and Bayraktar, B. (2025d). Effect of Graviola oil extract on anti-obesity effect and adipokine (Apelin and adiponectin) response in high fat diet-induced obese rats. Indian Journal of Animal Research. 59(2): 316-320. doi: 10.18805/IJAR.BF-1907.

  23. Ozcan, B.G., Bozok, U.G., Battal, F. and Bayraktar, B. (2024). The impact of aromatherapy on glossophobia among medical students: A study on cortisol levels and stress reduction. Medicine Science. 13(3): 610-615. doi: 10.5455/medscience. 2024.06.053.

  24. Özcan, G.B., Bayraktar, B., Bozok, Ü.G. and Erkiliç, T.O. (2026). The effectiveness of juniper and thyme essential oils in reducing the physiological symptoms of test anxiety in medical students. Mersin Üniversitesi Tıp Fakültesi Lokman Hekim Tıp Tarihi ve Folklorik Tıp Dergisi. 16(1): 256-267.

  25. Reddy, G.K.M., Dangi, K.S., Kumar, S.S. and Reddy, A.V. (2003). Effect of moisture stress on seed yield and quality in sunflower (Helianthus annuus L.). Journal of Oilseed Research. 20: 282-283.

  26. Sefaoglu, F.,and Ozer, H. (2002). Response of safflower (Carthamus tinctorius L.) to planting rate and row spacing in a high altitude environment. Erciyes Journal of Agriculture and Animal Sciences. 5(1): 1-10.

  27. Steel, R.G.D. and Torrie, J.H. (1980). Principles and Procedures of Statistics. McGraw-Hill Book Company Inc., New York, NY.

  28. Uke, P.C., Vilhekar, S.C. and Vaidya, E.R. (2017). Effect of plant population on yield and yield components of safflower cultivars in rainfed condition of Vidarbha region. Advance Research Journal of Crop Improvement. 8(1): 66-69.

  29. Ülker, U., Demirel, M.A., Bayraktar, B., Alçýgýr, M.E. and Aksoy, A. (2023). Preventive and therapeutic effects of the peel powder of P. granatum in a rat sepsis model. Veterinarski  Arhiv. 93(6): 719-730. doi: 10.24099/vet.arhiv.1973.

  30. Weiss, E.A. (2000). Safflower. In Oilseed Crops. Blackwell Science Ltd., Victoria, Australia.

  31. Zarei, G., Sdamsi, H. and Fazeli, F. (2011). Effect of planting density on yield and yield components of safflower cultivars in spring planting. World Academy of Science, Engineering and Technology. 60: 135-137.
Published In
Legume Research
Article Metrics
Metrics Icon
32
Views
0
Citations
Reviewed By
Share Article
Download Article
In this Article
    Contact us
    Follow us

    Full Research Article

    Effect of Different Sowing Norms and Row Spacing on Yield and Yield Components of Safflower (Carthamus tinctorius L.) in a High-altitude Environment under Irrigated Conditions

    F
    Fırat SEFAOGLU1,*
    0000-0002-8485-6564
    1Department of Genetics and Bioengineering, Faculty of Engineering and Architecture, Kastamonu University, Kastamonu, Türkiye.

    • Submitted22-03-2026|

    • Accepted25-05-2026|

    • First Online 08-06-2026|

    • doi 10.18805/LRF-951

    ABSTRACT

    Background: This study specifically investigated how different combinations of row spacing and sowing norms affect the yield and agronomic traits of the oilseed crop, safflower (Carthamus tinctorius L.).

    Methods: The study was conducted in 2017 and 2018 using the ‘Dinçer’ and ‘Yenice’ safflower genotypes. A factorial experiment was performed involving three different row spacing treatments (20, 40 and 60 cm) and three different sowing norm treatments (20, 40 and 60 kg ha-1. The parameters examined included plant height, number of branches, number of heads, number of seeds per head, 1000-seed weight, seed yield, oil content and oil yield. The effects of the treatments were statistically evaluated across different planting distances.

    Result: The row spacing treatment significantly affected all the examined parameters. The 40 cm row spacing was particularly effective, causing a decrease in plant height and branching while significantly increasing 1000-seed weight, seed yield, oil content and oil yield compared to the 20 and 60 cm spacings. Similarly, the sowing norms significantly affected all measured characteristics. The combination of 40 cm row spacing and 60 kg ha-1 sowing norm yielded the best results for seed yield, indicating that frequent sowing practices can significantly boost safflower productivity and optimize oil yield under irrigated, semi-arid conditions.

    INTRODUCTION

    Safflower is one of the few crops that can be grown economically in arid and semi-arid regions (Reddy et al., 2003). Medicinal and aromatic plants play an important role in protecting health (Bayraktar et al., 2020a; Bozok et al., 2025) and managing diseases with their anti-inflammatory (Bayraktar et al., 2020b; Bayraktar et al., 2021), antimicrobial (Ülker  et al., 2023; Orkun and Bayraktar, 2025c) and anticarcinogenic (Bayraktar and Bayraktar, 2019) effects. These plants also exhibit significant antidiabetic properties (Çelikel  et al., 2024; Orkun and Bayraktar, 2025a; Orkun  and Bayraktar, 2025b), thanks to their phytochemical compounds and high antioxidant contents (Bayraktar et al., 2023; Orkun and Bayraktar, 2025d; Ozcan et al., 2024; Gül  et al., 2024; Ozcan et al., 2026).
           
    It is also an oilseed crop of global importance due to its advantages such as non-selectiveness to soil, suitability for agricultural mechanization, low input costs and high oil quality (Delshad et al., 2018). Safflower plays a critical role in preventing vegetable oil deficits, yet it often fails to reach its full yield potential due to traditional production methods. Therefore, optimizing agricultural factors (agronomy) will provide a significant contribution to oil production (Çalıskan and Çalıskan, 2018).
           
    Good agronomic practices, together with high-yielding varieties, form the basis for obtaining high yields per unit area; where the optimum plant number and distribution are determined by varietal characteristics (Kayin et al., 2024; Sefaoglu and Ozer, 2022). Since plant density and distribution determine safflower yield and quality, appropriate agricultural practices (Such as planting norm and row spacing) are known to significantly increase the seed and oil yield (Sefaoglu and Özer, 2022). Low seed density delays maturation as individual plants produce more branches and heads, which extends the overall flowering and seed-filling period. Additionally, it reduces weed competition because the sparse canopy fails to provide sufficient ground cover to suppress weed growth. Conversely, excessive seed density, especially in years with low rainfall, increases disease rates by creating a more humid microclimate within the dense canopy and restricting airflow between plants. This increased competition for limited resources and moisture also reduces seed and oil yields (Berglund et al., 1998; Sefaoglu and Özer, 2022). This study focused on optimizing the commercial cultivation of safflower in the semi-arid eastern anatolia region, where this plant species is new. The primary objective was to investigate how row spacing and sowing norm (Plant density) affect the yield and agronomic traits of different safflower varieties under irrigated conditions, ultimately determining the best combination for production in this specific climate.

    MATERIALS AND METHODS

    Agronomic practices and traits measured
     
    The two-year study (2017-2018) was conducted in Erzurum, Eastern Anatolia (1663 m altitude, 41°67'E, 39°97'N), which has a semi-arid climate (meteorological data are presented in Fig 1). Meteorological data indicated that growing season temperatures remained consistent across both years. However, 2018 was characterized by a higher total precipitation of 285.9 mm, whereas 2017 received only 94.0 mm, falling below the long-term average. The experimental soil was characterized as clayey-loamy with a slightly alkaline reaction (pH 7.1-7.4). Chemical analysis revealed that the soil was medium in organic matter, sufficient in potassium, but low in phosphorus, with values ranging from 3.32 to 3.52 kg da-1. The experiment utilized a randomized complete block design with three replications, arranged as a split-split-plot factorial. The factors studied included two safflower cultivars (Dinçer and yenice in main plots), three row spacings (20, 40 and 60 cm in subplots) and three sowing norms (20, 40 and 60 kg ha-1 in sub-subplots). Sowing was done in mid-May of both years. Fertilization involved the application of 40 kg ha-1 triple superphosphate and 60 kg ha-1 ammonium sulfate. Each plot consisted of 4 rows of 5 m length. Harvesting  was done on September 30 in both years, with samples collected from the middle 2 rows to eliminate edge effects and the seeds were subsequently separated by machine threshing.

    Fig 1: Some important climatic data of the study area for 2017-2018.



    Statistical analysis
     
    All the data were analyzed using the SPSS package ((SPSS, Version 20.0, SPSS Inc, Chicago, IL, USA). When the F-test indicated statistical significance at the P=0.05 level, the protected least significant difference (Protected DUNCAN) was used to separate the means (Steel and Torrie, 1980).

    RESULTS AND DISCUSSION

    Significant annual differences (P<0.01) were observed for all traits, with the 2018 season yielding higher seed and oil yields due to favorable precipitation and temperature conditions. In contrast, the drier and hotter 2017 season negatively affected safflower growth and key yield components, such as plant height and branch number, due to rainfall deficit and heat stress. These environmental variations significantly influenced the performance of both ‘Dinçer’ and ‘Yenice’ cultivars, with 2018 providing better conditions for seed filling and oil accumulation.
     
    Plant height
     
    Plant height was significantly affected by year, cultivar, row spacing, sowing norm and the cultivar x row interaction (P<0.01) (Table 1). Plant height was substantially greater in 2018 (84.9 cm) than in 2017 (64.2 cm) due to more favorable climatic factors (Montemurro et al., 2007; Fig 1). The Dinçer cultivar was 6.8 cm taller than Yenice. The highest plant height was achieved at the 20 cm row spacing and 60 kg ha-1 sowing norm, while the shortest was at 40 cm spacing and 20 kg ha-1 application. This indicates that increased plant density stimulates vertical growth by intensifying competition for sunlight (Moghaddasi and Omidi, 2015; Uke et al., 2017).

    Table 1: Different parameters of safflower cultivars grown at different row spacing and planting rates.


     
    Branch number
     
    Branch number exhibited significant effects from year, cultivar, row spacing, sowing norm and the cultivar x row and row x norm interactions (P<0.01). The highest average branch number was recorded in 2018 (6.2 pieces), attributable to the high and uniform rainfall distribution during the growing season. The Dinçer variety (5.9 pieces) generally produced more branches (Table 1). Branch number significantly varied inversely with plant density: it increased with wider row spacing (60 cm yielded the highest value) but decreased significantly as the sowing norm was increased (20 kg ha-1 yielded the lowest). This observed reduction in branching in dense plantings is likely due to reduced light penetration and increased competition (Sharif and Omidi, 2016), as the plant prioritizes vertical growth over lateral development.
     
    Head number
     
    The head number, a critical yield factor, was significantly influenced by year, sowing norm and cultivar x row interaction (P<0.01) and by cultivar (P<0.05). The average head count in 2018 (14.4) was significantly higher than in 2017 (11.0) due to more favorable ecological conditions, specifically beneficial rainfall and temperature (Table 1), (Fig 1). The Dinçer cultivar produced the maximum number of heads. While the effect of different row spacing was statistically insignificant, the head number exhibited a clear inverse relationship with seeding density. The highest number of heads (13.3 pieces) was obtained at the lowest sowing norm (20 kg ha-1) and the lowest (12.4 pieces) was obtained at the highest norm (60 kg ha-1). This density-dependent decrease is consistent with previous reports that increased sowing norm reduces the number of heads due to intensified plant competition (Moghaddasi and Omidi, 2015; Uke et al., 2017).
     
    Seed number
     
    The number of seeds per head was significantly influenced by year, cultivar, sowing norm and the two-way interactions row spacing x cultivar and row spacing x sowing norm (P<0.01); row spacing alone was also significant (P<0.05). The highest seed count was recorded in 2018 (25.3 seeds) and the Dinçer cultivar produced the maximum number of seeds per head (24.5 pieces) due to genetic differences (Table 1). A wider 60 cm row spacing maximized seed number (Likely by enhancing branching via increased red light reception), while increasing the sowing norm significantly reduced the count (lowest at 60  kg ha-1 with 23.2 seeds), a reduction attributed to high plant density causing a post-flowering water deficit (Sefaoglu and Ozer, 2022; Caliþkan and Caliþkan, 2018).
     
    1000 seed weight
     
    The Thousand Seed Weight (TSW), a key yield determinant, was significantly affected by year, cultivar, row spacing, sowing norm and all two- and three-way interactions (Table 2). TSW was substantially higher in 2018 (45.3 g) than in 2017 (41.0 g), which is attributed to sufficient rainfall and suitable temperatures during the critical July 2018 flowering period (Beyyavas et al., 2011). TSW showed an inverse relationship with both row spacing (highest at the narrowest 20 cm with 44.4 g) and sowing norm. This negative response to high density is likely due to intensified competition slowing metabolic activities during the seed-filling stage (Zarei et al., 2011; Caliskan and Caliskan, 2018).

    Table 2: Different parameters of safflower cultivars grown at different row spacing and planting rates.


     
    Seed yield
     
    Seed yield, which is the cumulative result of various yield components and external factors, was significantly affected by year, variety, row spacing and sowing norm treatments (Table 2), (P<0.01). The effects of all interactions, except row spacing x sowing norm, were insignificant (Table 2). Seed yield exhibited significant genotypic differences (Bella  et al., 2019), with Dinçer (1360.9 kg ha-1) outperforming Yenice (1190.0 kg ha-1). Contrary to expectations, the first trial year yielded approximately 170.1 kg ha-1 higher than the second. This lower yield in the second year is likely attributed to climatic factors (Vicianova et al., 2020), specifically irregular rainfall and adverse temperatures during critical growth stages (emergence, flowering and grain-filling), negatively impacting key yield components (Sefaoglu and Ozer, 2022). Seed yield decreased as row spacing increased (1420.6 kg ha-1 at 20 cm vs. 1160.7 kg ha-1 at 60 cm), demonstrating that wider spacing leads to increased yield components but a lower overall yield per unit area. Conversely, seed yield increased consistently with the increase in sowing norm, peaking at 1360.2 kg ha-1 with the 60 kg ha-1 norm (Fig 2). This finding aligns with studies reporting that higher sowing norms increase yield (Ahadi et al., 2011), although other research suggests wider spacing enhances light utilization and reduces competition, leading to higher individual plant yield (Berglund et al., 1998; Zarei et al., 2011).

    Fig 2: The effect of genotypes ´ sowing date interaction on seed yield of (a) Dinçer and (b) Yenice genotypes.


     
    Seed oil concentration
     
    Seed oil concentration was significantly affected by all treatments, as well as the cultivar x row spacing and row spacing x sowing norm interactions (P<0.01) (Fig 3), (Table 2). Oil content is highly dependent on genotype (Kose and Bilir, 2017; Kayin et al., 2024) and climatic conditions, notably temperature during the grain filling period (Weiss, 2000). The higher crude oil ratio observed in 2018 (Wetter year) is attributed to significantly higher total rainfall in May, June and July compared to 2017 (Table 2). Among row spacings, the highest oil content was obtained at 40 cm. While the oil ratio showed no significant change between the 20 and 40 kg ha-1 sowing norms, it was unexpectedly higher in the densest planting (60 kg ha-1). This highlights that environmental factors, particularly adequate moisture during critical stages, often override simple agronomic density effects in determining seed oil quality (Fig 3).

    Fig 3: The effect of genotypes ´ sowing date interaction on seed oil percentage of (a) Dinçer and (b) Yenice genotypes.


     
    Oil yield
     
    Oil yield was significantly affected by all factors, reflecting the combined influence of oil concentration and seed yield (Table 2), (Fig 3). Due to its superior genetic structure, the Dinçer cultivar produced the highest oil yield. The lower oil yield in the first year is attributed to irregular and insufficient rainfall. Oil yield showed a density-dependent response, with the lowest yield recorded at the widest 60 cm row spacing and the highest (330.5 kg ha-1) obtained at the narrowest 20 cm spacing. Furthermore, oil yield increased proportionally with the sowing norm, reaching its maximum at 60 kg ha-1. This pattern indicates that seed yield per unit area is the primary factor driving the final oil yield, outweighing the minor changes in oil concentration.
     
    Principal component anaysis (PCA)
     
    The principal component analysis (PCA) identified two effective components (with eigen values > 1) (Fig 4). These components explained the majority of the total variance in both cultivars: 98.7% in Dinçer (First: 28.3%, Second: 70.4%) and 97.6% in Yenice (First: 22.3%, Second: 75.3%). In the Dinçer cultivar, the treatment combinations of 40 cm row spacing with 20 kg ha-1 and 40 kg ha-1 sowing norms clustered together, showing strong correlations with branch number, head number and plant height. In contrast, 40x60 cm and 20x40 cm distances were associated with the major yield components: 1000-seed weight, seed oil concentration, oil yield and seed yield. For the Yenice cultivar, the 20x20 cm and 20x40 cm distances clustered, correlating strongly with a wider range of traits including plant height, seed number, thousand seed weight and head number. Additionally, the highest sowing norms (60x2 kg ha-1 and 60x4 kg ha-1) correlated strongly with branch number, while the 20x6 kg ha-1 distance showed high correlations with seed oil concentration, oil yield and seed yield (Fig 3; Fig 4).

    Fig 4: The results of the dendrogram based on cluster analysis and the biplot of the first and second components from the principal component analysis (PCA) for the two genotypes (a- Yenice, b- Dinçer).

    CONCLUSION

    The study demonstrates that safflower yield and quality are significantly influenced by row spacing and sowing norms in high-altitude, irrigated environments. While wider row spacing (60 cm) improved individual plant traits such as branch and head number, it resulted in a lower overall seed and oil yield per unit area. The 40 cm row spacing provided the most balanced performance, yielding the highest results for seed yield, oil content and oil yield. Regarding plant density, the 60 kg ha-1 sowing norm was found to be the most effective for maximizing total productivity. Consequently, the study concludes that a combination of 40 cm row spacing and a 60 kg ha-1 sowing norm is the optimal configuration for achieving maximum yield and suitability for mechanized production under these specific climatic conditions.

    ACKNOWLEDGEMENT

    The author would like to thank Kastamonu University for providing the necessary facilities and infrastructure to conduct this research.
     
    Disclaimers
     
    The content and its accuracy is the sole responsibility of the authors. It does not reflect institutional views and no liability is accepted for any losses from its use.
    Informed consent
     
    Since this study involved only commercial cell lines and did not involve any human participants, biological materials, or personal data, clinical trial registration and informed consent were not required.

    CONFLICT OF INTEREST

    The authors declare that there are no conflicts of interest regarding the publication of this paper. The research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.

    REFERENCES


    1. Ahadi, K., Kenarsari, M.J. and Rokhzadi, A. (2011). Effects of sowing date and planting density on growth and yield of safflower cultivars as second crop. Advances in Environmental Biology. 5(9): 2756-2760.

    2. Bayraktar, B. and Bayraktar, S. (2019). Investigation of Circadian Rhythm and Cortisol Circadian Rhythm Physiology in Cancer. Science and Technology Research, INES, Çizgi Publishing, Konya, pp. 161-165.

    3. Bayraktar, B., Tekce, E., Aksakal, V., Gül, M., Takma, Ç., Bayraktar, S. and Eser, G. (2020b). Effect of the addition of essential fatty acid mixture to the drinking water of the heat stress broilers on adipokine (Apelin, BDNF) response, histopathologic findings in liver and intestines and some blood parameters. Italian Journal of Animal Science. 19(1): 656-666. doi: 10.1080/1828051X.2020.1778548.

    4. Bayraktar, B., Tekce, E., Bayraktar, S., Böyük, G., Takma, Ç., Aksakal, V. and Gürbüz, A.B. (2023). Investigation of endocrine response of thyroid and intestinal and adipose tissues due to the addition of Moringa oleifera essential oil in diet for quails exposed to heat stress. Revista Brasileira de Zootecnia. 52: e20210040. doi: 10.37004/rbz.e20210040.

    5. Bayraktar, B., Tekce, E., Kaya, H., Gürbüz, A.B., Dirican, E., Korkmaz, S. and Ülker, U. (2021). Adipokine, gut and thyroid hormone responses to probiotic application in chukar partridges (Alectoris chukar) exposed to heat stress. Acta Veterinaria Hungarica. 69(3): 282-290. doi: 10.1556/ 004.2021.00030.

    6. Bayraktar, B., Tekce, E., Kaya, H., Karaalp, M. and Turunc, E. (2020a). The impact of dietary tarragon (Artemisia dracunculus) on serum apelin, brain-derived neurotrophic factor, cardiac troponin concentrations and histopathology of liver tissue in laying hens housed at different stocking densities. Vet Med-Czech. 65: 269-279. doi: 10.17221/ 9/2020-VETMED.

    7. Bella, L.S., Tuttolomondo, T., Lazzeri, L., Matteo, R., Leto, C. and Licata, M. (2019). An agronomic evaluation of new safflower (Carthamus tinctorius L.) germplasm for seed and oil yields under Mediterranean climate conditions. Agronomy. 9(8): 468. doi: 10.3390/agronomy9080468.

    8. Berglund, D.R., Riveland, N. and Bergman, J. (1998). Safflower Production. North Dakota State University NDSU Extension Service.

    9. Beyyavas, V., Haliloglu, H., Copur, O. and Yilmaz, A. (2011). Determination of seed yield and yield components of some safflower (Carthamus tinctorius L.) cultivars, lines and populations under the semi-arid conditions. African Journal of Biotechnology. 10(4): 527-534. doi: 10.5897/AJB10.2223.

    10. Bozok, Ü.G., Özcan, G.B. and Cinar, F.U. (2025). Reduction of torsion detorsion induced testicular damage with hawthorn extract: Oxidative, hormonal and histological effects. Food Science and Nutrition. 13(5): e70211. doi: 10.1002/ fsn3.70211.

    11. Calıskan, S. and Calıskan, M.E. (2018). Row and plant spacing effects on the yield and yield components of safflower in a mediterranean-type environment. Turkish Journal of Field Crops. 23(2): 85-92. doi: 10.17557/tjfc.427807.

    12. Çelikel, T.S., Bayraktar, B., Bülbül, A.S., Sait, A. and Korkmaz, S. (2024). Effect of different rates of rambutan peel extract on visfatin and cardiac troponin ı response in type 2 diabetic rats ýnduced with streptozotocin. Indian Journal of Animal Research. 58(11): 1969-1974. doi: 10.18805/ IJAR.BF-1899.

    13. Delshad, E., Yousefi, M., Sasannezhad, P., Rakhshandeh, H. and Ayati, Z. (2018). Medical uses of Carthamus tinctorius L. (Safflower): A comprehensive review from traditional medicine to modern medicine. Electronic Physician. 10(4): 6672. doi: 10.19082/6672.

    14. Gül, S.N.S., Eminoğlu, D.Ö., Tekçe, E., Bayraktar, B., Güven, L., Dilsiz, A. and Sait, A. (2024). Eugenol alleviates the negative effects of experimental periodontitis and regulates adipokine hormones in rats. South African Journal of Botany. 172: 579-585. doi: 10.1016/j.sajb. 2024.07.049.

    15. KayIn, G.B., Kayýn, H. and Göksoy, A.T. (2024). Effects of plant density on micronutrient uptake in sunflower (Helianthus annuus L.) varieties. Turkish Journal of Field Crops. 29(1): 9-17. doi: 10.17557/tjfc.1417088.

    16. Kose, A. and Bilir, O. (2017). The influence of row spacing and seeding rate on yield and yield components of safflower (Carthamus tinctorius L.). Journal of Field Crops Central Research Institute. 26(1): 45-52. doi: 10.28994/ tcrad.320491.

    17. Moghaddasi, M.S. and Omidi, A.H. (2015). Determination of optimum row-spacing and plant density in goldasht safflower variety. Scientific Papers, Series A. Agronomy. 58: 301- 306.

    18. Montemurro, F., Giorgio, D.D., Fornaro, F., Scalcione, E. and Vitti, C. (2007). Influence of climatic conditions on yields, N uptake and efficiency in sunflower. Italian Journal of Agrometeorology. 2: 28-34.

    19. Orkun, E.T. and Bayraktar, B. (2025a). Effect of jackfruit pulp extract on serum nesfatin-1 and visfatin levels in streptozotocin-induced rats. Indian Journal of Animal Research. 59(2): 293-298. doi: 10.18805/IJAR.BF-1902.

    20. Orkun, E.T. and Bayraktar, B. (2025b). Effect of Moringa oleifera oil extract on adipokine (Apelin, visfatin and nesfatin-1) and cardiac (cTnI) response in streptozotocin-induced rats. Indian Journal of Animal Research. 59(1): 108- 113. doi: 10.18805/IJAR.BF-1904.

    21. Orkun, E.T. and Bayraktar, B. (2025c). The effect of cannabidiol on myokine, cerebral and cardiac response in rats with sepsis ýnduced by cecal ligation and puncture method. Indian Journal of Animal Research. 59(3): 497-502. doi: 10.18805/IJAR.BF-1905.

    22. Orkun, E.T. and Bayraktar, B. (2025d). Effect of Graviola oil extract on anti-obesity effect and adipokine (Apelin and adiponectin) response in high fat diet-induced obese rats. Indian Journal of Animal Research. 59(2): 316-320. doi: 10.18805/IJAR.BF-1907.

    23. Ozcan, B.G., Bozok, U.G., Battal, F. and Bayraktar, B. (2024). The impact of aromatherapy on glossophobia among medical students: A study on cortisol levels and stress reduction. Medicine Science. 13(3): 610-615. doi: 10.5455/medscience. 2024.06.053.

    24. Özcan, G.B., Bayraktar, B., Bozok, Ü.G. and Erkiliç, T.O. (2026). The effectiveness of juniper and thyme essential oils in reducing the physiological symptoms of test anxiety in medical students. Mersin Üniversitesi Tıp Fakültesi Lokman Hekim Tıp Tarihi ve Folklorik Tıp Dergisi. 16(1): 256-267.

    25. Reddy, G.K.M., Dangi, K.S., Kumar, S.S. and Reddy, A.V. (2003). Effect of moisture stress on seed yield and quality in sunflower (Helianthus annuus L.). Journal of Oilseed Research. 20: 282-283.

    26. Sefaoglu, F.,and Ozer, H. (2002). Response of safflower (Carthamus tinctorius L.) to planting rate and row spacing in a high altitude environment. Erciyes Journal of Agriculture and Animal Sciences. 5(1): 1-10.

    27. Steel, R.G.D. and Torrie, J.H. (1980). Principles and Procedures of Statistics. McGraw-Hill Book Company Inc., New York, NY.

    28. Uke, P.C., Vilhekar, S.C. and Vaidya, E.R. (2017). Effect of plant population on yield and yield components of safflower cultivars in rainfed condition of Vidarbha region. Advance Research Journal of Crop Improvement. 8(1): 66-69.

    29. Ülker, U., Demirel, M.A., Bayraktar, B., Alçýgýr, M.E. and Aksoy, A. (2023). Preventive and therapeutic effects of the peel powder of P. granatum in a rat sepsis model. Veterinarski  Arhiv. 93(6): 719-730. doi: 10.24099/vet.arhiv.1973.

    30. Weiss, E.A. (2000). Safflower. In Oilseed Crops. Blackwell Science Ltd., Victoria, Australia.

    31. Zarei, G., Sdamsi, H. and Fazeli, F. (2011). Effect of planting density on yield and yield components of safflower cultivars in spring planting. World Academy of Science, Engineering and Technology. 60: 135-137.
    In this Article
      Contact us
      Follow us
      Published In
      Legume Research

      Editorial Board

      View all (0)