volume 46 integrating scientific advances for sustainability and global health : 152-160,   Doi: 10.18805/ag.DF-934

Evaluation of the Performance and Productivity of Triticale (X. Triticosecale Wittmack) Genotypes under Foliar Super Nano-Fertilizer Application

1Department of Field Crops, College of Agriculture, University of Basrah, Iraq.
Cite article:- Al-Wahid Abdul A. Mohammed, AL-Abody Kalaf Auda Muhamed, Jamel Ali Fatimah (2026). Evaluation of the Performance and Productivity of Triticale (X. Triticosecale Wittmack) Genotypes under Foliar Super Nano-Fertilizer Application . Agricultural Science Digest. 46: 152-160. doi: 10.18805/ag.DF-934.

Background: Triticale (X. Triticosecale Wittmack) is an important cereal crop characterized by its potential for high grain yield and adaptation to diverse environmental conditions. Understanding the genetic variability, heritability, genetic advance, stability and divergence among triticale genotypes is essential for identifying superior genotypes for breeding programs. The present study aimed to evaluate the genetic parameters and performance stability of four triticale genotypes under different concentrations of super nano fertilizer.

Methods: The field experiment was conducted during the cold winter months of 2024-2025 at the Field Crops Department, Agriculture College of, Karmat Ali site, Basrah University, Iraq, using silty loam soil. Four triticale genotypes (Mohannad, Amal-7, Liron-5 and Farah) were evaluated under three concentrations of super nano fertilizer (0, 4 and 6 g L-1), applied by foliar spraying at the tillering and beginning of flowering stages. The experiment was conducted using a randomized complete block design with three replications. Genetic, phenotypic and environmental variances, broad-sense heritability, genetic and phenotypic coefficients of variation, genetic advance, stability and genetic divergence were  estimated.

Result: The estimated genetic, environmental, phenotypic, 0.369182, 0.011310 and 0.380492, respectively. Broad-sense heritability for grain yield was high (97.02%), while the phenotypic and genotypic coefficients of variation were 18.11172% and 17.84051%, respectively. The highest genetic advance values were recorded for flag leaf area (55.98) and Spikes number m-2 (50.03). Stability analysis identified Amal-7 (G2) as the most desirable genotype, combining high grain yield with superior genetic stability. Genetic divergence analysis revealed the smallest genetic distance between Liron-5 and Farah (282.437), indicating greater genetic similarity, whereas the largest genetic distance was observed between Amal-7 and Farah (35079.583), indicating substantial genetic divergence. The results demonstrated considerable genetic variability among the evaluated triticale genotypes, with high heritability for grain yield and substantial potential for genetic improvement. Among the tested genotypes, Amal-7 (G2) exhibited superior yield performance and genetic stability and may therefore be considered a promising genotype for cultivation and future triticale breeding programs.

Among the crops of high importance belonging to the Poaceae family is (X. Triticosecale Wittmack). Triticale grains are generally richer in vitamins and minerals than wheat and rye, with strong nutritional value and a high protein content, particularly the amino acid lysine. Although bread made from triticale is lower in quality, it has greater nutritional value than wheat bread. The grains are associated with improved bone growth and digestion, better blood sugar control and stimulated blood circulation. They also contain phenols and dietary fiber. Cereals contain (3.7%) lysine and (11.5-22.5%) other proteins (Sadeeq et al., 2019; Kamanova et al., 2023). Its genetic makeup makes triticale suitable for cultivation under diverse environmental conditions, while varieties differ in their growth and yield characteristics (Al-Zubaidi, 2022). Ultimately, productivity depends on suitable environmental conditions, crop maintenance, growth factors and soil. One of the most important practices is the application of nano-fertilizers, including super-nano fertilizer. These fertilizers supply plants with essential elements, which can increase production and improve quality. Selecting new varieties and evaluating their responses to different concentrations of nano-super fertilizer are also important, particularly because these varieties can contribute to higher yields in crops such as Triticale Crop. Their responses vary according to each variety’s genetic capacity to convert manufactured nutrients from the source to the destination. Foliar feeding is another important factor for achieving the highest yield at present, increasing production and reducing pollution associated with fertilizer use (Hassan et al., 2019; Al-Abody, 2015). Materials that raise yield without damaging the environment are needed and nano-phosphate fertilizer is among the most significant options. This experiment was conducted because few studies have estimated specific genetic characteristics, examined stability and genetic divergence and assessed the responses of four Triticale Crop varieties to three different amounts of nano-super fertilizer.
An experiment was carried out in silty loam soil during winter 2024-2025 at the “Karma Ali” site - the Department of Field Crops, College of Agriculture, Basra Governorate. Selected genetic parameters have been studied for the following Triticale cultivars (genotypes): “Mohannad”, “Amal-7”, “Leron-5” and “Farah”. Also, the effect of three concentrations of “nano-super fertilizer” (0, 4 and 6 g/L) was studied (Table 1). Factorial experiment in RCBD design was conducted, where three replications were used and treatments were randomly allocated to blocks. The field was divided into experimental units (plots) with the size of 1.5 m × 2 m, containing 10 rows with the length of 1.5 m and 20 cm distance between the rows. Sowing was performed throughout all experimental units on November 1, 2024. The plots were irrigated right after sowing and irrigation was continued when necessary. Nano-fertilizer was used for foliar sprays twice in the early morning hours: once at the beginning of flowering and once in the vegetative growth stage. “Zahi” solution was used as the spreading agent to decrease the surface tension of water, while in the control treatments-distilled water was sprayed. The amount of the nitrogen fertilizer was urea (with 46% of nitrogen) at the level of 120 kg N/ha; the fertilization was conducted in two stages: the first one 15 days after planting and the second - in the elongation stage of the plants (Abdelaal et al., 2019). The phosphorus fertilizer (as P2O5) in the amount of 100 kg/ha was used before planting based on the results of soil analysis of its physical and chemical characteristics (Table 2) (Al-Morshedy, 2023). Manual weeding was done when necessary and the irrigation was provided according to the needs of the crop. Genetic parameters that were estimated in this experiment include genotypic variance (σ2G), environmental variance (σ2E) and phenotypic variance (σ2P) (Walter, 1975). The formula of broad-sense heritability estimation (h2b.s. %) proposed by Hanson et al., (1956) was used. Phenotypic coefficient of variation was estimated using the formula developed by Dudley and Moll (1969) and genotypic coefficient of variation - with the help of the formula by Burton (1952). Moreover, genetic stability was studied using the methods developed by Burton (1952), El-Sahookie (1985), Finlay and Wilkinson (1963) and Eberhart and Russell (1966). Also, the estimation of genetic divergence was conducted in four varieties of “tortilla” crops based on mean grain yield and its components, as described by Hamdalla (2011).

Table 1: Studied genotypes and fertilizer concentrations in the environments (test environments).



Table 2: Some chemical and physical properties of field soil before planting.


 
Calculation of genetic parameters:
 
Calculation genetic, environmental and phenotypic variances:
 
Variations of genetic and phenotypic were by Walter, (1975) as following:
 

 
σ2E = Mse
                                                                                       
σ2P = σ2G + σ2E
 
Degree of heritability: heritability in the broad sense (h²b.s):
 
Heritability was Estimated using the following method, (Hanson et al., 1956):.
 

 
Where,
h2b.s. = Broad sense-heritability.
σ2G = Trait genetic variance.
σ2P = Trait phenotypic variance.

 
Hierarchical cluster analysis
 
Hamdalla (2011) explains that the Agglomerative approach was applied to Triticale Crop genetic patterns are divided into groups, making the data easier to use in cluster analysis (Sneath and Sokai, 1973; Williams, 1976). The process consists of several stages, beginning a straightforward technique (Sneath and Sokai, 1973). Based on the preceding formula, the resulting values indicate the degree of similarity between the sum rates across the matrix of proximities produced in the first stage using SPSS version - 22.
 
Distance (x, y) = [Σi ( xi - yi)2]1/2  
The results in Table (3) indicate the influence of genotypes on the studied traits. The genotype Liron-5 performed best, yielding the greatest plant height 95.09 cm. The genotype Amal-7 excelled in several parameters, producing the largest flag leaf area 41.12 cm2, the highest spikes number 424.90 m-2, the greatest grains number in spike 45.493 and the highest grain yield 4.380 t ha-1. Meanwhile, the genotype Mohannad recorded the highest weight 1000 grains 36.40 g. Conversely, the genotype Farah showed the lowest mean values for all the studied traits; this may be attributed to genetic differences among the Genotypes, a finding consistent with AL-Asadi and AL-Abody, (2025); Laouar and Hafsi, (2024).

Table 3: Effect of genotypes, in the studied traits.


       
The results presented in Table (4) indicate that the 6 g L-1 concentration was superior, yielding the highest mean values for all studied traits specifically 91.11 cm, 32.87 cm2, 330.00 m-2, 40.358, 33.31 g and 3.987 t ha-1, respectively. Conversely, the 0 g L-1 concentration recorded the lowest mean values for all studied traits. This can be attributed to the role of nano-fertilizer in enhancing the studied characteristics and producing higher mean values, given the significant function it performs. This finding is consistent with AL-Abody et al. (2020). 

Table 4: Effect of super nano fertilization concentrations, in the studied traits.


       
The results in Table (5) indicate an interaction effect between the genotypes and the concentrations of nano-fertilizer. The genotype Amal-7, at a concentration of 6 g L-1, outperformed the others, yielding the highest mean values   for most of the studied traits; specifically, it recorded the highest averages for flag leaf area, spikes number, grains number in spike and grain yield 44.32 cm2, 441.50 m2, 48.260 and 4.790 t ha-1, respectively. This can be attributed to the interactive effect between the genotypes and the nano-fertilizer concentrations, a finding that aligns with (AL-Abody et al., 2020). 

Table 5: Effect of interactions between genotypes and super nano fertilization concentrations, in the studied traits.


 
Analysis of variance
 
According to Table (6), the effects of the four genotypes were all highly significant. Differences in the traits under study may be attributed to the inherited characteristics of these genotypes and their sensitivity to environmental conditions. Similar results were reported by (Al-Abody, 2020; Sheera, 2023; Al-Samarraie, 2024), who found highly significant effects among genotypes. The concentrations of super nano fertilizer also had highly significant effects on all studied traits, with values of 607.921**, 107.3343**, 6561.50**, 154.2586**, 94.6992** and 5.13670**, respectively. Applying super nano fertilizer may activate enzymes responsible for essential plant functions, thereby improving growth characteristics. These results agree with (Devi et al., 2022 Al-Samarraie, 2024). The interaction between the two study factors genotypes and super nano fertilizer concentrations was highly significant for every trait examined, with values of 140.975**, 4.3246**, 1047.07**, 0.7031**, 7.0197** and 0.09577**, respectively. This occurred because the phenotypic variance of the genetic compositions reflected the interplay of genetic and environmental variation. These findings are consistent with (Khaskheil et al., 2017; Al-Azzawi, 2020; Al-Samarraie, 2024).

Table 6: Analysis of variance for genotypes, super nano fertilization concentrations and their interactions in the studied traits.


       
Table (7) showed that the genetic variation values for the plant traits listed were 59.68692, 68.10361, 5783.652, 45.61822, 40.25681 and 0.369182, respectively. These values reflect the magnitude of genetic variation and its importance in the selection process, which results from the variance of genetic factors. For environmental variation, the highest values for plant height and number of spikes m2 were 5.202 and 26.46, respectively. The phenotypic variation values were 64.88892, 68.97731, 5810.112, 45.82692, 40.82781 and 0.380492, respectively. Broad-sense heritability was high for all traits, indicating that the  study Features could be improved and that this improvement could be passed on to subsequent generations. The broad-sense heritability values also reflected greater genetic variation than environmental variation across all the studied traits, providing an opportunity to select for their improvement. In general, comparing the values shows that genetic variation was higher for all traits, a useful feature. Because their environmental impact was small, plant breeders should collect genetic material directly for breeding, development and selection of superior features. This agrees with AL-Abody, (2019); Mahmood et al., (2025). The flag leaf area, number of spikes m-2 and 1000-seed weight had the highest phenotypic and genetic coefficients of variation; plant height had the lowest. These findings are consistent with Al-Abody et al. (2020); Omar and Al-Layla, (2024); AL-Asadi and AL-Abody, (2025); Al-Mafarji et al. (2026a); Hindi et al., (2025) and Hindi et al., (2026). Based on these results, the traits can be selected because there were high significant differences. Flag leaf area and spike number m-2 were measured to estimate expected genetic improvement (GA%), expressed as a percentage. The highest values were recorded for these traits, reaching 55.98% and 50.03%, respectively. This suggests that flag leaf area and spike number m-2 are suitable for selection and may produce substantial genetic progress. Plant height, by contrast, showed the lowest genetic improvement, at 18.29. These results are consistent with the findings of Al-Samarraie (2024).

Table 7: Estimates of genetic parameters for all studied traits of the triticale crop.


 
Stability analysis
 
The findings in Table 8 show differences in mean yield (YI) among the varieties studied. G2 produced the highest grain yield, at 4.380 t. ha-1, because of differences in the genetic compositions of the genotypes, consistent with  Al-Mafarji et al., (2026b), Al-Asadi and Al-Abody (2025), Across the genetic-stability analysis and all methods examined, genotype G2 was identified as genetically stable while also producing the higher yield. According to (El-Sahookie, 1985), its H% was 87.703; under the method of (Finlay and Wilkinson, 1963), its bi value was 1.041. Using the method of (Eberhart and Russell, 1966), S2di was (0.003), while the method of (Wricke, 1962) gave a Wi value of 0.011. Under the Geometric Adaptability Index method, the GAI value was 4.357. We conclude that genetic stability analysis identified genotype G2 as the ideal, genetically stable structure (Mesfin and Tulu, 2024; Al-Samarraie, 2024; Al-Zaidi, 2024). These findings also confirmed the usefulness of genetic stability analysis methods for detecting the ideal, genetically stable genetic structure.

Table 8: Mean grain yield and estimates of stability parameters for grain yield of four genotypes in three environments.


 
GGE - Biplot stability
 
Nano-super fertilizers were foliar-applied to the genotypes at three different levels (0, 4 and 6 g L-1) that correspond to environments E1, E2 and E3, respectively. Differences between the performance of genotypes and their responses under various conditions were observed within these environments. Fig (1) shows how the genotype responds to the environmental conditions by showing the connection between the genotypes and the environments where differences in the responses to the fertilizer levels are shown. The ideal genotype under the studied environments is shown in Fig (2). According to this figure, G2 genotype was found to be the closest to the ideal genotype due to its superior performance and desirable genetic composition. Fig (3) shows genotype preference for each environment that indicates differences in the responses of genotypes and the most suitable genotypes under the different concentrations of fertilizers. The polygon view shows the performance and adaptation of genotypes to the environments. As shown in Fig (4), the stability of the genotypes under different environments was confirmed and G2 genotype showed the most desirable genotype stability. Among all environments E3 (6 g L-1) was found to be the most favourable environment for the genotype performance. These results were in accordance with Daemo and Ashango (2024) and Sharif et al., (2026).

Fig 1: Relationship between genotypes and studied environments.



Fig 2: The ideal genotype across the studied environments.



Fig 3: Genotype preferences for each environment.



Fig 4: Stability of the studied genotypes across environments.


 
Clustering analysis
 
Varietal genetic divergence was analyzed to determine how the varieties could be grouped according to their genetic similarity or divergence, as shown in Table 9. The analysis classified the varieties based on their performance and genetic origin. The results presented in Table (9) and Fig (5) show that this method detected a genetic gap of 35,079,583 between the two genetic compositions, (G2) and (G4). This wide gap indicates that the two compositions contain genetically distant and different genes, reflecting a high level of genetic divergence. Crosses between them may therefore be made and used in future breeding work, particularly hybridization followed by selection to identify the optimal genetic profile with the preferred and desired genetic characteristics. This analysis also estimated the genetic distance between the two genetic compositions, G3 and G4, at 282.437. Their closeness may result from shared genetic material. At the same time, genetic compositions from different and genetically distant sources do not necessarily have to be identical. Because G3 and G4 are genetically similar, their performance may benefit from carrying some major preferred genes that could be used in subsequent breeding programs. One of the two closely related compositions could therefore replace the other if it were lost, eliminating the need to cross them. When molecular techniques are unavailable, this statistical method may serve as a successful alternative. This technique can make comparisons easier by showing the relationships among genetic compositions, helping select those that show genetic divergence while preserving their genetic origins. Khalil et al., (2020) and AL-Asadi and AL-Abody (2025), explained the benefits and importance of genetic divergence analysis for detecting genetically divergent structures for crossbreeding.

Fig 5: Genetic tree.



Table 9: Genetic divergence.

Analysis of variances results showed spikes number of (m-2) recorded highest genetic, environmental variance, while area of flag leaf gave highest phenotypic variance and coefficients of variation. Spikes number (m-2) and grains per spike recorded highest heritability degree in broad sense, while flag leaf area and Spikes number m-2 recorded highest percentage of genetic improvement. This indicates that these two traits are capable of achieving genetic progress and can be selected for. Genetic stability analysis showed that the genotype (G2) Amal-7 is the ideal variety with a high yield and genetic stability. The highest distance for the genes was found between Amal-7 and Farah genotypes and hybridization between them is possible to obtain a genotype with the desired traits.
The authors declare that they have no conflict of interest regarding the publication of this manuscript.

  1. Abdelaal, H.K., Bugaev, P.D. and Fomina, T.N. (2019). Nitrogen fertilization effect on grain yield and quality of spring triticale varieties. Indian Journal of Agricultural Research. 53(5): 578-583. doi: 10.18805/IJARe.A-426.

  2. Al-Abody, M.A.K., Al-Sebahi, W.A.J. and AL-Abdullah, S.A.M. (2020). Study of genetic and phenotype correlations and heritability for twelve varieties of wheat (Triticum aestivum L.) planting under different environmental of Basrah. Al-Muthanna Journal of Agricultural Sciences. 8(1): 8-20.

  3. AL-Abody, M.A.K., Jamel, F.A. and Wahid, M.A.A. (2020). Effect of spraying with different concentrations of nano iron fertilizer on the yield and its components of varieties of wheat (Triticum aestivum L.). International Journal of Agricultural and Statistical Sciences. 16(1): 1199-1203. https://connectjournals.com/03899.2020.16.1199. 

  4. Al-Abody, M.Á.Ê. (2015). Response of bread wheat (Triticum aestivum L.) to foliar application of iron and manganese and their interaction in yield and yield components. Basrah Journal of Agricultural Sciences. 28(2): 87-97.

  5. AL-Abody, M.A.K. (2019). Analysis of genetic stability of wheat cultivars (Triticum aestivum L.) planted under different environmental conditions in Basrah Governorate. Ph D thesis. College of Agriculture - University of Basrah. 

  6. AL-Asadi, E.Q.A. and AL-Abody, M.A.K. (2025). Genetic parameters of different oat genotypes using cluster analysis. SABRAO Journal of Breeding and Genetics. 57(1): 86- 93. https://doi.org/10.54910/sabrao2025.57.1.9.

  7. Al-Azzawi, M.S. (2020). Evaluation of performance, estimation of genetic parameters and selection indices for bread wheat genotypes under paclobutrazol spraying. MS.c. Thesis College of Agriculture, University of Tikrit. Iraq Iraq.

  8. Al-Mafarji, T.R.T., Aziz, J.M. and Zabin, K.M. (2026a). Study of nature of gene action, combining ability and heterosis in F2 half-diallel crosses for grain yield and its components in bread wheat. Tikrit Journal for Agricultural Sciences. 26(2): 299-314. https://doi.org/10.25130/tjas.26.2.22.

  9. Al-Mafarji, T.R.T., Abdullah, R.M., Zabin, K.M. and Hasan, S.A. (2026b). Genetic variability and stability of grain yield and related traits in barley genotypes across three seasons using Eberhart-Russell and GGE-Biplot analyses. Egyptian Journal of Agronomy. 48(2): 751-765. https:// doi.org/10.21608/agro.2026.450394.2007.  

  10. Al-Morshedy, H.Y.J. (2023). Comparison of the effect of spraying with nano phosphate fertilizer and ground application of triple superphosphate fertilizer on the growth and yield of two genotypes of wheat (Triticum aestivum L.). Master’s Thesis. College of Agriculture, University of Basra, Basra, Iraq.

  11. Al-Samarraie, R.S.K. (2024). Estimation of genetic parameter and stability of barley (Hordeum vulgare L.) genotypes under influence of different foliar concentrations of zinc. Ph.D. Thesis College of Agriculture, University of Tikrit. Iraq. 

  12. Al-Zaidi, A.J.H. (2024). Responses of wheat (Triticum aestivum L.) and (X. Triticosecale wittmack) for levels of phosphorus fertilizer and estimation of some genetic parameters under conditions of Basrah. MS.c. Thesis College of Agriculture, University of Basrah. Iraq.

  13. Al-Zubaidi, AAbKM (2022). Response of wheat (Triticum aestivum L.) varieties to spraying with the growth regulator ethephon. Master’s Thesis. College of Agriculture - University of Basra. p: 128.

  14. Burton, G.W. (1952). Quantitative inheritance in grasses. Proc. Sixth. Int Grass Land Congr. 1: 277-288.

  15. Daemo, B.B. and Ashango, Z. (2024). Application of AMMI and GGE biplot for genotype by environment interaction and yield stability analysis in potato genotypes grown in Dawuro Zone, Ethiopia. Journal of Agriculture and Food Research. 18: 101287.

  16. Devi, E.P., Patel, J.M., Netajit Singh, L., Patel, K.S. and Patel,  S.K. (2022). Comparative analysis for various grain quality parameters in bread Wheat varieties. Biological and In. J. 14(2): 867-875.

  17. Dudley, J.W. and Moll, R.H. (1969). Interpretations and use of estimates of heritability and genetic variances in plant breeding. Crop Sci. 9: 257-262. https://doi.org/10.2135/ cropsci1969.0011183X000900030004x.

  18. Eberhart, S. and Russell, W.A. (1966). Stability parameters for comparing varieties. Crop Sci. 6: 36-40. https://doi.org/ 10.2135/cropsci1966.0011183X000600010011x.  

  19. El-Sahookie, M.M. (1985). Homeostasis estimation for crop germplasm adaptation. Agr. Water Resources. 4(2): 1-5.

  20. Finlay, K.W. and Wilkinson, G.N. (1963). The analysis of adaptation in a plant-breeding programme. Australian Journal of Agricultural Research. 14(6): 742-754. https://doi.org/ 10.1071/AR9630742. 

  21. Hamdalla, M.SH. (2011). Genetic diversity of sunflower based on cluster analysis. Iraqi Journal of Agricultural Sciences. 42(3): 17-23.

  22. Hanson, C.H., Robinson, H.F. and Comstock, R.E. (1956). Biometrical studies of yield in segregating populations of Korean lespedeza. Agronomy Journal. 48(6): 268-272. https:// doi.org/10.2134/agronj1956.00021962004800060008x. 

  23. Hassan, H.H., Huthily, K.H. and Mohsen, K.H. (2019). Effect of humic acid and silicon on some growth characteristics of maize (Zea mays L.). Basrah Journal of Agricultural Sciences. 32(2): 23-32. https://doi.org/10.37077/25200 860.2019.190.  

  24. Hindi, H.A., Faisal, L.N., Sharif, Y.O.N.A. and Al-Mafarji, T.R.T. (2026). Performance evaluation, estimation of genetic and phenotypic correlation coefficients and path coefficient analysis of quantitative traits in triticale genotypes grown under different seeding rates. Pakistan Journal of Agricultural Research. 39(1): 77-88. https://doi.org/ 10.17582/j.pjar/2026/39.1.77.88. 

  25. Hindi, H., Madab, D., Sharif, Y. and Al-Mafarji, T. (2025). Effect of boron spraying on flour quality traits of bread wheat (Triticum aestivum L.) genotypes and estimation of their genetic parameters. Egyptian Journal of Agronomy. 47(4): 1463-1472. https://doi.org/10.21608/agro.2025. 412351.1807. 

  26. Kamanova, S., Yermekov, Y., Shah, K., Mulati, A., Liu, X., Bulashev, B. and Ospankulova, G. (2023). Review on nutritional benefits of triticale. Czech Journal of Food Sciences. 41(4): 248-262. https://doi.org/10.17221/146/2023-CJFS.

  27. Khalil, M.R., Almahasneh, H.A. and Lawand, S.Y. (2020). Detection of genetic polymorphism in seven barley (Hordeum vulgare L.) varieties using SSR. Basrah Journal of Agricultural Sciences. 33(2): 115-124. https://doi.org/ 10.37077/25200860.2020.33.2.10.  

  28. Khaskheil, M.A., Ansari, M.A., Khan, M.A., Laghari, U.A., Shar, T. and Bhutto, M. (2017). Growth and yield performance of different wheat genotypes under various potassium levels. Int. J. of Bio Sci. 10(5): 106-115. http://dx.doi.org/ 10.12692/ijb/10.5.106-115. 

  29. Laouar, A. and Hafsi, M. (2024). Behavior assessment of some triticale (Triticosecale wittmack) genotypes under mediterranean semi-arid conditions. Agricultural Science Digest. 44(4): 708-713. doi: 10.18805/ag.DF-523. 

  30. Mahmood, E.T., Al-Mafarji, T.R.T., AL-Ethawi, M.B., Ahmed, K.K., Al-Ani, S.H.I. and Korolev, K.P. (2025). Correlation analysis of growth, yield and quality traits in maize (Zea mays L.) hybrids under different plant densities. IOP Conference Series: Earth and Environmental Science. 1538(1): 012041. https://doi.org/10.1088/1755-1315/1538/1/0120 

  31. Mesfin, A. and Tulu, L. (2024). Genotype × environment interaction and stability analysis of soybean (Glycine max L.) genotypes using AMMI and other stability methods in Western Ethiopia. Jimma University Institutional Repository. https:// repository.ju.edu.et//handle/123456789/749. 

  32. Omar, A. and Al-Layla, M. (2024). Estimation genetic parameter, genotypic and phonotypic correlation, path and cluster analysis of quantitative traits for Bread Wheat genotypes in Erbil under rain-fed condition. Journal of Medicinal and Industrial Plant Sciences. 2(3): 23-34. https:// doi.org/10.32894/MEDIP.24.3.4 

  33. Sadeeq, F.A., Muhammad, M.H. and Madb, W.S. (2019). The effect of amino acid spraying dates and concentrations on growth and yield characteristics of three varieties of (X. Triticosecale Wittmack) (Triticale). Proceedings of the Third International Agricultural Conference, (Special Issue). pp 801-810 .

  34. Sharif, Y.O.N.A., AL-Abody, M.A.K., Muhammad, S.T. and Al-Mafarji, T.R.T. (2026). Genetic parameters and stability of soybean [Glycine max (L.) Merr.] cultivars under nano-phosphorus foliar fertilization levels. Indian Journal of Agricultural Research. 60(4): 518-524. doi: 10.18805/IJARe.AF-981.

  35. Sheera, A.T., Dey, N.A., Tushadri S.M.K., Pandey, B.K. and Dar, Z.A. (2023). Morpho-nutritional status of micronutrient efficient wheat (Triticum aestivum L.) genotypes under changing. Env. Geochem. Health Sci. J. 8(1): 1-14. https://doi.org/1007/s10653-023-01610-y  

  36. Sneath, P.H.A. and Sokal, R.R. (1973). Numerical Taxonomy. The Principles and Practice of Numerical Classification. Copyright CAB Int. CABI USA. PP: 573.

  37. Walter, A.B. (1975). Manual of Quantitative Genetics. (3rd edition). Washington State Univ. Press. USA. pp: 130. 

  38. Williams, W.T. (1976). Pattern Analysis in Agricultural Sciences. Amsterdam Elsevier Scientific Publishing. pp: 331.

  39. Wricke, G. (1962). Über eine Methode zur Erfassung der ökologischen Streubreite in Feldversuchen. Zeitschrift für Pflanzenzüchtung. 47: 92-96. 
Cite article:- Al-Wahid Abdul A. Mohammed, AL-Abody Kalaf Auda Muhamed, Jamel Ali Fatimah (2026). Evaluation of the Performance and Productivity of Triticale (X. Triticosecale Wittmack) Genotypes under Foliar Super Nano-Fertilizer Application . Agricultural Science Digest. 46: 152-160. doi: 10.18805/ag.DF-934.

Background: Triticale (X. Triticosecale Wittmack) is an important cereal crop characterized by its potential for high grain yield and adaptation to diverse environmental conditions. Understanding the genetic variability, heritability, genetic advance, stability and divergence among triticale genotypes is essential for identifying superior genotypes for breeding programs. The present study aimed to evaluate the genetic parameters and performance stability of four triticale genotypes under different concentrations of super nano fertilizer.

Methods: The field experiment was conducted during the cold winter months of 2024-2025 at the Field Crops Department, Agriculture College of, Karmat Ali site, Basrah University, Iraq, using silty loam soil. Four triticale genotypes (Mohannad, Amal-7, Liron-5 and Farah) were evaluated under three concentrations of super nano fertilizer (0, 4 and 6 g L-1), applied by foliar spraying at the tillering and beginning of flowering stages. The experiment was conducted using a randomized complete block design with three replications. Genetic, phenotypic and environmental variances, broad-sense heritability, genetic and phenotypic coefficients of variation, genetic advance, stability and genetic divergence were  estimated.

Result: The estimated genetic, environmental, phenotypic, 0.369182, 0.011310 and 0.380492, respectively. Broad-sense heritability for grain yield was high (97.02%), while the phenotypic and genotypic coefficients of variation were 18.11172% and 17.84051%, respectively. The highest genetic advance values were recorded for flag leaf area (55.98) and Spikes number m-2 (50.03). Stability analysis identified Amal-7 (G2) as the most desirable genotype, combining high grain yield with superior genetic stability. Genetic divergence analysis revealed the smallest genetic distance between Liron-5 and Farah (282.437), indicating greater genetic similarity, whereas the largest genetic distance was observed between Amal-7 and Farah (35079.583), indicating substantial genetic divergence. The results demonstrated considerable genetic variability among the evaluated triticale genotypes, with high heritability for grain yield and substantial potential for genetic improvement. Among the tested genotypes, Amal-7 (G2) exhibited superior yield performance and genetic stability and may therefore be considered a promising genotype for cultivation and future triticale breeding programs.

Among the crops of high importance belonging to the Poaceae family is (X. Triticosecale Wittmack). Triticale grains are generally richer in vitamins and minerals than wheat and rye, with strong nutritional value and a high protein content, particularly the amino acid lysine. Although bread made from triticale is lower in quality, it has greater nutritional value than wheat bread. The grains are associated with improved bone growth and digestion, better blood sugar control and stimulated blood circulation. They also contain phenols and dietary fiber. Cereals contain (3.7%) lysine and (11.5-22.5%) other proteins (Sadeeq et al., 2019; Kamanova et al., 2023). Its genetic makeup makes triticale suitable for cultivation under diverse environmental conditions, while varieties differ in their growth and yield characteristics (Al-Zubaidi, 2022). Ultimately, productivity depends on suitable environmental conditions, crop maintenance, growth factors and soil. One of the most important practices is the application of nano-fertilizers, including super-nano fertilizer. These fertilizers supply plants with essential elements, which can increase production and improve quality. Selecting new varieties and evaluating their responses to different concentrations of nano-super fertilizer are also important, particularly because these varieties can contribute to higher yields in crops such as Triticale Crop. Their responses vary according to each variety’s genetic capacity to convert manufactured nutrients from the source to the destination. Foliar feeding is another important factor for achieving the highest yield at present, increasing production and reducing pollution associated with fertilizer use (Hassan et al., 2019; Al-Abody, 2015). Materials that raise yield without damaging the environment are needed and nano-phosphate fertilizer is among the most significant options. This experiment was conducted because few studies have estimated specific genetic characteristics, examined stability and genetic divergence and assessed the responses of four Triticale Crop varieties to three different amounts of nano-super fertilizer.
An experiment was carried out in silty loam soil during winter 2024-2025 at the “Karma Ali” site - the Department of Field Crops, College of Agriculture, Basra Governorate. Selected genetic parameters have been studied for the following Triticale cultivars (genotypes): “Mohannad”, “Amal-7”, “Leron-5” and “Farah”. Also, the effect of three concentrations of “nano-super fertilizer” (0, 4 and 6 g/L) was studied (Table 1). Factorial experiment in RCBD design was conducted, where three replications were used and treatments were randomly allocated to blocks. The field was divided into experimental units (plots) with the size of 1.5 m × 2 m, containing 10 rows with the length of 1.5 m and 20 cm distance between the rows. Sowing was performed throughout all experimental units on November 1, 2024. The plots were irrigated right after sowing and irrigation was continued when necessary. Nano-fertilizer was used for foliar sprays twice in the early morning hours: once at the beginning of flowering and once in the vegetative growth stage. “Zahi” solution was used as the spreading agent to decrease the surface tension of water, while in the control treatments-distilled water was sprayed. The amount of the nitrogen fertilizer was urea (with 46% of nitrogen) at the level of 120 kg N/ha; the fertilization was conducted in two stages: the first one 15 days after planting and the second - in the elongation stage of the plants (Abdelaal et al., 2019). The phosphorus fertilizer (as P2O5) in the amount of 100 kg/ha was used before planting based on the results of soil analysis of its physical and chemical characteristics (Table 2) (Al-Morshedy, 2023). Manual weeding was done when necessary and the irrigation was provided according to the needs of the crop. Genetic parameters that were estimated in this experiment include genotypic variance (σ2G), environmental variance (σ2E) and phenotypic variance (σ2P) (Walter, 1975). The formula of broad-sense heritability estimation (h2b.s. %) proposed by Hanson et al., (1956) was used. Phenotypic coefficient of variation was estimated using the formula developed by Dudley and Moll (1969) and genotypic coefficient of variation - with the help of the formula by Burton (1952). Moreover, genetic stability was studied using the methods developed by Burton (1952), El-Sahookie (1985), Finlay and Wilkinson (1963) and Eberhart and Russell (1966). Also, the estimation of genetic divergence was conducted in four varieties of “tortilla” crops based on mean grain yield and its components, as described by Hamdalla (2011).

Table 1: Studied genotypes and fertilizer concentrations in the environments (test environments).



Table 2: Some chemical and physical properties of field soil before planting.


 
Calculation of genetic parameters:
 
Calculation genetic, environmental and phenotypic variances:
 
Variations of genetic and phenotypic were by Walter, (1975) as following:
 

 
σ2E = Mse
                                                                                       
σ2P = σ2G + σ2E
 
Degree of heritability: heritability in the broad sense (h²b.s):
 
Heritability was Estimated using the following method, (Hanson et al., 1956):.
 

 
Where,
h2b.s. = Broad sense-heritability.
σ2G = Trait genetic variance.
σ2P = Trait phenotypic variance.

 
Hierarchical cluster analysis
 
Hamdalla (2011) explains that the Agglomerative approach was applied to Triticale Crop genetic patterns are divided into groups, making the data easier to use in cluster analysis (Sneath and Sokai, 1973; Williams, 1976). The process consists of several stages, beginning a straightforward technique (Sneath and Sokai, 1973). Based on the preceding formula, the resulting values indicate the degree of similarity between the sum rates across the matrix of proximities produced in the first stage using SPSS version - 22.
 
Distance (x, y) = [Σi ( xi - yi)2]1/2  
The results in Table (3) indicate the influence of genotypes on the studied traits. The genotype Liron-5 performed best, yielding the greatest plant height 95.09 cm. The genotype Amal-7 excelled in several parameters, producing the largest flag leaf area 41.12 cm2, the highest spikes number 424.90 m-2, the greatest grains number in spike 45.493 and the highest grain yield 4.380 t ha-1. Meanwhile, the genotype Mohannad recorded the highest weight 1000 grains 36.40 g. Conversely, the genotype Farah showed the lowest mean values for all the studied traits; this may be attributed to genetic differences among the Genotypes, a finding consistent with AL-Asadi and AL-Abody, (2025); Laouar and Hafsi, (2024).

Table 3: Effect of genotypes, in the studied traits.


       
The results presented in Table (4) indicate that the 6 g L-1 concentration was superior, yielding the highest mean values for all studied traits specifically 91.11 cm, 32.87 cm2, 330.00 m-2, 40.358, 33.31 g and 3.987 t ha-1, respectively. Conversely, the 0 g L-1 concentration recorded the lowest mean values for all studied traits. This can be attributed to the role of nano-fertilizer in enhancing the studied characteristics and producing higher mean values, given the significant function it performs. This finding is consistent with AL-Abody et al. (2020). 

Table 4: Effect of super nano fertilization concentrations, in the studied traits.


       
The results in Table (5) indicate an interaction effect between the genotypes and the concentrations of nano-fertilizer. The genotype Amal-7, at a concentration of 6 g L-1, outperformed the others, yielding the highest mean values   for most of the studied traits; specifically, it recorded the highest averages for flag leaf area, spikes number, grains number in spike and grain yield 44.32 cm2, 441.50 m2, 48.260 and 4.790 t ha-1, respectively. This can be attributed to the interactive effect between the genotypes and the nano-fertilizer concentrations, a finding that aligns with (AL-Abody et al., 2020). 

Table 5: Effect of interactions between genotypes and super nano fertilization concentrations, in the studied traits.


 
Analysis of variance
 
According to Table (6), the effects of the four genotypes were all highly significant. Differences in the traits under study may be attributed to the inherited characteristics of these genotypes and their sensitivity to environmental conditions. Similar results were reported by (Al-Abody, 2020; Sheera, 2023; Al-Samarraie, 2024), who found highly significant effects among genotypes. The concentrations of super nano fertilizer also had highly significant effects on all studied traits, with values of 607.921**, 107.3343**, 6561.50**, 154.2586**, 94.6992** and 5.13670**, respectively. Applying super nano fertilizer may activate enzymes responsible for essential plant functions, thereby improving growth characteristics. These results agree with (Devi et al., 2022 Al-Samarraie, 2024). The interaction between the two study factors genotypes and super nano fertilizer concentrations was highly significant for every trait examined, with values of 140.975**, 4.3246**, 1047.07**, 0.7031**, 7.0197** and 0.09577**, respectively. This occurred because the phenotypic variance of the genetic compositions reflected the interplay of genetic and environmental variation. These findings are consistent with (Khaskheil et al., 2017; Al-Azzawi, 2020; Al-Samarraie, 2024).

Table 6: Analysis of variance for genotypes, super nano fertilization concentrations and their interactions in the studied traits.


       
Table (7) showed that the genetic variation values for the plant traits listed were 59.68692, 68.10361, 5783.652, 45.61822, 40.25681 and 0.369182, respectively. These values reflect the magnitude of genetic variation and its importance in the selection process, which results from the variance of genetic factors. For environmental variation, the highest values for plant height and number of spikes m2 were 5.202 and 26.46, respectively. The phenotypic variation values were 64.88892, 68.97731, 5810.112, 45.82692, 40.82781 and 0.380492, respectively. Broad-sense heritability was high for all traits, indicating that the  study Features could be improved and that this improvement could be passed on to subsequent generations. The broad-sense heritability values also reflected greater genetic variation than environmental variation across all the studied traits, providing an opportunity to select for their improvement. In general, comparing the values shows that genetic variation was higher for all traits, a useful feature. Because their environmental impact was small, plant breeders should collect genetic material directly for breeding, development and selection of superior features. This agrees with AL-Abody, (2019); Mahmood et al., (2025). The flag leaf area, number of spikes m-2 and 1000-seed weight had the highest phenotypic and genetic coefficients of variation; plant height had the lowest. These findings are consistent with Al-Abody et al. (2020); Omar and Al-Layla, (2024); AL-Asadi and AL-Abody, (2025); Al-Mafarji et al. (2026a); Hindi et al., (2025) and Hindi et al., (2026). Based on these results, the traits can be selected because there were high significant differences. Flag leaf area and spike number m-2 were measured to estimate expected genetic improvement (GA%), expressed as a percentage. The highest values were recorded for these traits, reaching 55.98% and 50.03%, respectively. This suggests that flag leaf area and spike number m-2 are suitable for selection and may produce substantial genetic progress. Plant height, by contrast, showed the lowest genetic improvement, at 18.29. These results are consistent with the findings of Al-Samarraie (2024).

Table 7: Estimates of genetic parameters for all studied traits of the triticale crop.


 
Stability analysis
 
The findings in Table 8 show differences in mean yield (YI) among the varieties studied. G2 produced the highest grain yield, at 4.380 t. ha-1, because of differences in the genetic compositions of the genotypes, consistent with  Al-Mafarji et al., (2026b), Al-Asadi and Al-Abody (2025), Across the genetic-stability analysis and all methods examined, genotype G2 was identified as genetically stable while also producing the higher yield. According to (El-Sahookie, 1985), its H% was 87.703; under the method of (Finlay and Wilkinson, 1963), its bi value was 1.041. Using the method of (Eberhart and Russell, 1966), S2di was (0.003), while the method of (Wricke, 1962) gave a Wi value of 0.011. Under the Geometric Adaptability Index method, the GAI value was 4.357. We conclude that genetic stability analysis identified genotype G2 as the ideal, genetically stable structure (Mesfin and Tulu, 2024; Al-Samarraie, 2024; Al-Zaidi, 2024). These findings also confirmed the usefulness of genetic stability analysis methods for detecting the ideal, genetically stable genetic structure.

Table 8: Mean grain yield and estimates of stability parameters for grain yield of four genotypes in three environments.


 
GGE - Biplot stability
 
Nano-super fertilizers were foliar-applied to the genotypes at three different levels (0, 4 and 6 g L-1) that correspond to environments E1, E2 and E3, respectively. Differences between the performance of genotypes and their responses under various conditions were observed within these environments. Fig (1) shows how the genotype responds to the environmental conditions by showing the connection between the genotypes and the environments where differences in the responses to the fertilizer levels are shown. The ideal genotype under the studied environments is shown in Fig (2). According to this figure, G2 genotype was found to be the closest to the ideal genotype due to its superior performance and desirable genetic composition. Fig (3) shows genotype preference for each environment that indicates differences in the responses of genotypes and the most suitable genotypes under the different concentrations of fertilizers. The polygon view shows the performance and adaptation of genotypes to the environments. As shown in Fig (4), the stability of the genotypes under different environments was confirmed and G2 genotype showed the most desirable genotype stability. Among all environments E3 (6 g L-1) was found to be the most favourable environment for the genotype performance. These results were in accordance with Daemo and Ashango (2024) and Sharif et al., (2026).

Fig 1: Relationship between genotypes and studied environments.



Fig 2: The ideal genotype across the studied environments.



Fig 3: Genotype preferences for each environment.



Fig 4: Stability of the studied genotypes across environments.


 
Clustering analysis
 
Varietal genetic divergence was analyzed to determine how the varieties could be grouped according to their genetic similarity or divergence, as shown in Table 9. The analysis classified the varieties based on their performance and genetic origin. The results presented in Table (9) and Fig (5) show that this method detected a genetic gap of 35,079,583 between the two genetic compositions, (G2) and (G4). This wide gap indicates that the two compositions contain genetically distant and different genes, reflecting a high level of genetic divergence. Crosses between them may therefore be made and used in future breeding work, particularly hybridization followed by selection to identify the optimal genetic profile with the preferred and desired genetic characteristics. This analysis also estimated the genetic distance between the two genetic compositions, G3 and G4, at 282.437. Their closeness may result from shared genetic material. At the same time, genetic compositions from different and genetically distant sources do not necessarily have to be identical. Because G3 and G4 are genetically similar, their performance may benefit from carrying some major preferred genes that could be used in subsequent breeding programs. One of the two closely related compositions could therefore replace the other if it were lost, eliminating the need to cross them. When molecular techniques are unavailable, this statistical method may serve as a successful alternative. This technique can make comparisons easier by showing the relationships among genetic compositions, helping select those that show genetic divergence while preserving their genetic origins. Khalil et al., (2020) and AL-Asadi and AL-Abody (2025), explained the benefits and importance of genetic divergence analysis for detecting genetically divergent structures for crossbreeding.

Fig 5: Genetic tree.



Table 9: Genetic divergence.

Analysis of variances results showed spikes number of (m-2) recorded highest genetic, environmental variance, while area of flag leaf gave highest phenotypic variance and coefficients of variation. Spikes number (m-2) and grains per spike recorded highest heritability degree in broad sense, while flag leaf area and Spikes number m-2 recorded highest percentage of genetic improvement. This indicates that these two traits are capable of achieving genetic progress and can be selected for. Genetic stability analysis showed that the genotype (G2) Amal-7 is the ideal variety with a high yield and genetic stability. The highest distance for the genes was found between Amal-7 and Farah genotypes and hybridization between them is possible to obtain a genotype with the desired traits.
The authors declare that they have no conflict of interest regarding the publication of this manuscript.

  1. Abdelaal, H.K., Bugaev, P.D. and Fomina, T.N. (2019). Nitrogen fertilization effect on grain yield and quality of spring triticale varieties. Indian Journal of Agricultural Research. 53(5): 578-583. doi: 10.18805/IJARe.A-426.

  2. Al-Abody, M.A.K., Al-Sebahi, W.A.J. and AL-Abdullah, S.A.M. (2020). Study of genetic and phenotype correlations and heritability for twelve varieties of wheat (Triticum aestivum L.) planting under different environmental of Basrah. Al-Muthanna Journal of Agricultural Sciences. 8(1): 8-20.

  3. AL-Abody, M.A.K., Jamel, F.A. and Wahid, M.A.A. (2020). Effect of spraying with different concentrations of nano iron fertilizer on the yield and its components of varieties of wheat (Triticum aestivum L.). International Journal of Agricultural and Statistical Sciences. 16(1): 1199-1203. https://connectjournals.com/03899.2020.16.1199. 

  4. Al-Abody, M.Á.Ê. (2015). Response of bread wheat (Triticum aestivum L.) to foliar application of iron and manganese and their interaction in yield and yield components. Basrah Journal of Agricultural Sciences. 28(2): 87-97.

  5. AL-Abody, M.A.K. (2019). Analysis of genetic stability of wheat cultivars (Triticum aestivum L.) planted under different environmental conditions in Basrah Governorate. Ph D thesis. College of Agriculture - University of Basrah. 

  6. AL-Asadi, E.Q.A. and AL-Abody, M.A.K. (2025). Genetic parameters of different oat genotypes using cluster analysis. SABRAO Journal of Breeding and Genetics. 57(1): 86- 93. https://doi.org/10.54910/sabrao2025.57.1.9.

  7. Al-Azzawi, M.S. (2020). Evaluation of performance, estimation of genetic parameters and selection indices for bread wheat genotypes under paclobutrazol spraying. MS.c. Thesis College of Agriculture, University of Tikrit. Iraq Iraq.

  8. Al-Mafarji, T.R.T., Aziz, J.M. and Zabin, K.M. (2026a). Study of nature of gene action, combining ability and heterosis in F2 half-diallel crosses for grain yield and its components in bread wheat. Tikrit Journal for Agricultural Sciences. 26(2): 299-314. https://doi.org/10.25130/tjas.26.2.22.

  9. Al-Mafarji, T.R.T., Abdullah, R.M., Zabin, K.M. and Hasan, S.A. (2026b). Genetic variability and stability of grain yield and related traits in barley genotypes across three seasons using Eberhart-Russell and GGE-Biplot analyses. Egyptian Journal of Agronomy. 48(2): 751-765. https:// doi.org/10.21608/agro.2026.450394.2007.  

  10. Al-Morshedy, H.Y.J. (2023). Comparison of the effect of spraying with nano phosphate fertilizer and ground application of triple superphosphate fertilizer on the growth and yield of two genotypes of wheat (Triticum aestivum L.). Master’s Thesis. College of Agriculture, University of Basra, Basra, Iraq.

  11. Al-Samarraie, R.S.K. (2024). Estimation of genetic parameter and stability of barley (Hordeum vulgare L.) genotypes under influence of different foliar concentrations of zinc. Ph.D. Thesis College of Agriculture, University of Tikrit. Iraq. 

  12. Al-Zaidi, A.J.H. (2024). Responses of wheat (Triticum aestivum L.) and (X. Triticosecale wittmack) for levels of phosphorus fertilizer and estimation of some genetic parameters under conditions of Basrah. MS.c. Thesis College of Agriculture, University of Basrah. Iraq.

  13. Al-Zubaidi, AAbKM (2022). Response of wheat (Triticum aestivum L.) varieties to spraying with the growth regulator ethephon. Master’s Thesis. College of Agriculture - University of Basra. p: 128.

  14. Burton, G.W. (1952). Quantitative inheritance in grasses. Proc. Sixth. Int Grass Land Congr. 1: 277-288.

  15. Daemo, B.B. and Ashango, Z. (2024). Application of AMMI and GGE biplot for genotype by environment interaction and yield stability analysis in potato genotypes grown in Dawuro Zone, Ethiopia. Journal of Agriculture and Food Research. 18: 101287.

  16. Devi, E.P., Patel, J.M., Netajit Singh, L., Patel, K.S. and Patel,  S.K. (2022). Comparative analysis for various grain quality parameters in bread Wheat varieties. Biological and In. J. 14(2): 867-875.

  17. Dudley, J.W. and Moll, R.H. (1969). Interpretations and use of estimates of heritability and genetic variances in plant breeding. Crop Sci. 9: 257-262. https://doi.org/10.2135/ cropsci1969.0011183X000900030004x.

  18. Eberhart, S. and Russell, W.A. (1966). Stability parameters for comparing varieties. Crop Sci. 6: 36-40. https://doi.org/ 10.2135/cropsci1966.0011183X000600010011x.  

  19. El-Sahookie, M.M. (1985). Homeostasis estimation for crop germplasm adaptation. Agr. Water Resources. 4(2): 1-5.

  20. Finlay, K.W. and Wilkinson, G.N. (1963). The analysis of adaptation in a plant-breeding programme. Australian Journal of Agricultural Research. 14(6): 742-754. https://doi.org/ 10.1071/AR9630742. 

  21. Hamdalla, M.SH. (2011). Genetic diversity of sunflower based on cluster analysis. Iraqi Journal of Agricultural Sciences. 42(3): 17-23.

  22. Hanson, C.H., Robinson, H.F. and Comstock, R.E. (1956). Biometrical studies of yield in segregating populations of Korean lespedeza. Agronomy Journal. 48(6): 268-272. https:// doi.org/10.2134/agronj1956.00021962004800060008x. 

  23. Hassan, H.H., Huthily, K.H. and Mohsen, K.H. (2019). Effect of humic acid and silicon on some growth characteristics of maize (Zea mays L.). Basrah Journal of Agricultural Sciences. 32(2): 23-32. https://doi.org/10.37077/25200 860.2019.190.  

  24. Hindi, H.A., Faisal, L.N., Sharif, Y.O.N.A. and Al-Mafarji, T.R.T. (2026). Performance evaluation, estimation of genetic and phenotypic correlation coefficients and path coefficient analysis of quantitative traits in triticale genotypes grown under different seeding rates. Pakistan Journal of Agricultural Research. 39(1): 77-88. https://doi.org/ 10.17582/j.pjar/2026/39.1.77.88. 

  25. Hindi, H., Madab, D., Sharif, Y. and Al-Mafarji, T. (2025). Effect of boron spraying on flour quality traits of bread wheat (Triticum aestivum L.) genotypes and estimation of their genetic parameters. Egyptian Journal of Agronomy. 47(4): 1463-1472. https://doi.org/10.21608/agro.2025. 412351.1807. 

  26. Kamanova, S., Yermekov, Y., Shah, K., Mulati, A., Liu, X., Bulashev, B. and Ospankulova, G. (2023). Review on nutritional benefits of triticale. Czech Journal of Food Sciences. 41(4): 248-262. https://doi.org/10.17221/146/2023-CJFS.

  27. Khalil, M.R., Almahasneh, H.A. and Lawand, S.Y. (2020). Detection of genetic polymorphism in seven barley (Hordeum vulgare L.) varieties using SSR. Basrah Journal of Agricultural Sciences. 33(2): 115-124. https://doi.org/ 10.37077/25200860.2020.33.2.10.  

  28. Khaskheil, M.A., Ansari, M.A., Khan, M.A., Laghari, U.A., Shar, T. and Bhutto, M. (2017). Growth and yield performance of different wheat genotypes under various potassium levels. Int. J. of Bio Sci. 10(5): 106-115. http://dx.doi.org/ 10.12692/ijb/10.5.106-115. 

  29. Laouar, A. and Hafsi, M. (2024). Behavior assessment of some triticale (Triticosecale wittmack) genotypes under mediterranean semi-arid conditions. Agricultural Science Digest. 44(4): 708-713. doi: 10.18805/ag.DF-523. 

  30. Mahmood, E.T., Al-Mafarji, T.R.T., AL-Ethawi, M.B., Ahmed, K.K., Al-Ani, S.H.I. and Korolev, K.P. (2025). Correlation analysis of growth, yield and quality traits in maize (Zea mays L.) hybrids under different plant densities. IOP Conference Series: Earth and Environmental Science. 1538(1): 012041. https://doi.org/10.1088/1755-1315/1538/1/0120 

  31. Mesfin, A. and Tulu, L. (2024). Genotype × environment interaction and stability analysis of soybean (Glycine max L.) genotypes using AMMI and other stability methods in Western Ethiopia. Jimma University Institutional Repository. https:// repository.ju.edu.et//handle/123456789/749. 

  32. Omar, A. and Al-Layla, M. (2024). Estimation genetic parameter, genotypic and phonotypic correlation, path and cluster analysis of quantitative traits for Bread Wheat genotypes in Erbil under rain-fed condition. Journal of Medicinal and Industrial Plant Sciences. 2(3): 23-34. https:// doi.org/10.32894/MEDIP.24.3.4 

  33. Sadeeq, F.A., Muhammad, M.H. and Madb, W.S. (2019). The effect of amino acid spraying dates and concentrations on growth and yield characteristics of three varieties of (X. Triticosecale Wittmack) (Triticale). Proceedings of the Third International Agricultural Conference, (Special Issue). pp 801-810 .

  34. Sharif, Y.O.N.A., AL-Abody, M.A.K., Muhammad, S.T. and Al-Mafarji, T.R.T. (2026). Genetic parameters and stability of soybean [Glycine max (L.) Merr.] cultivars under nano-phosphorus foliar fertilization levels. Indian Journal of Agricultural Research. 60(4): 518-524. doi: 10.18805/IJARe.AF-981.

  35. Sheera, A.T., Dey, N.A., Tushadri S.M.K., Pandey, B.K. and Dar, Z.A. (2023). Morpho-nutritional status of micronutrient efficient wheat (Triticum aestivum L.) genotypes under changing. Env. Geochem. Health Sci. J. 8(1): 1-14. https://doi.org/1007/s10653-023-01610-y  

  36. Sneath, P.H.A. and Sokal, R.R. (1973). Numerical Taxonomy. The Principles and Practice of Numerical Classification. Copyright CAB Int. CABI USA. PP: 573.

  37. Walter, A.B. (1975). Manual of Quantitative Genetics. (3rd edition). Washington State Univ. Press. USA. pp: 130. 

  38. Williams, W.T. (1976). Pattern Analysis in Agricultural Sciences. Amsterdam Elsevier Scientific Publishing. pp: 331.

  39. Wricke, G. (1962). Über eine Methode zur Erfassung der ökologischen Streubreite in Feldversuchen. Zeitschrift für Pflanzenzüchtung. 47: 92-96. 
In this Article
Published In
Agricultural Science Digest

Editorial Board

View all (0)